|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Wiring up electric clocks to the transducer » Post Reply
|
drunkenfool |
posted on 6th Sep 07 at 11:13 |
ttt again :lol: | |
Dave A |
posted on 29th May 06 at 09:35 |
what else do you need to know? | |
drunkenfool |
posted on 29th May 06 at 09:26 |
ttt | |
Ally |
posted on 29th Aug 05 at 20:08 |
aye but i dont know which pin is for which on the actual sender. | |
Dave A |
posted on 29th Aug 05 at 19:37 |
black: ign live | |
Steve Smith |
posted on 29th Aug 05 at 17:33 |
i should be able to find it from an old invoice at work, leave it with me. | |
Richie |
posted on 29th Aug 05 at 13:50 |
do you have the part number for the wiring loom? | |
Steve Smith |
posted on 28th Aug 05 at 17:12 |
you can buy it from vauxhall still | |
Richie |
posted on 28th Aug 05 at 11:21 |
Its sourcing the wiring plug thats the issue, im trying to make my own. | |
Steve Smith |
posted on 28th Aug 05 at 09:58 |
You need the sensor off the early corsa with electric clocks. This is a big unit that screws into the top of the gear box and converts manual drive into an electric impulse and is located where the speedo cable would normally go on the F20. You also need the wiring plug for this so it is best to buy from scrap yard. You need to cut off the wiring plug to your current sensor and match the 3 wires colour for colour. I have done this on my XE conversion and the speedo reads exactly as before. | |
Ally |
posted on 27th Aug 05 at 23:33 |
im still trying to work tims out buddy :(:( | |
infinitycorsa |
posted on 27th Aug 05 at 20:54 |
matt do u mean add the rev count or am i mistaken? | |
drunkenfool |
posted on 27th Aug 05 at 20:37 |
I bought the transducer to get the electric clocks working, but does anyone know what wires i have to connect up to get it working? 1.2 16v clocks and F20 box. Cheers guys :thumbs: |