ttt again :lol:
Dave, Ive got no wires coming out of the transducer so dont suppose you know which pin goes to which wire do you? Also, where abouts is the wire located for the pulse signal?

what else do you need to know?

old post:!

ttt

aye but i dont know which pin is for which on the actual sender.

black: ign live
brown: earth
red/blue: pulse to the clocks

i should be able to find it from an old invoice at work, leave it with me.

do you have the part number for the wiring loom?

Like i said we both have the correct transducer, just not the connecting plug.

you can buy it from vauxhall still

Its sourcing the wiring plug thats the issue, im trying to make my own.

You need the sensor off the early corsa with electric clocks. This is a big unit that screws into the top of the gear box and converts manual drive into an electric impulse and is located where the speedo cable would normally go on the F20. You also need the wiring plug for this so it is best to buy from scrap yard. You need to cut off the wiring plug to your current sensor and match the 3 wires colour for colour. I have done this on my XE conversion and the speedo reads exactly as before.

[Edited on 28-08-2005 by Steve Smith]

im still trying to work tims out buddy :(:(

matt do u mean add the rev count or am i mistaken?

I bought the transducer to get the electric clocks working, but does anyone know what wires i have to connect up to get it working? 1.2 16v clocks and F20 box. Cheers guys :thumbs: