|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » corsa suspension » Post Reply
|
goodfellow |
posted on 15th Jun 05 at 09:44 |
i thought that cause every other company i emailed has said that et45 will be ok. | |
Jake |
posted on 15th Jun 05 at 09:28 |
yeh those rims should be ok. The company you emailed is bullshitting you | |
goodfellow |
posted on 15th Jun 05 at 08:33 |
i've been offered some konig e racers off a mate who dont want them after he fitted them to his ibiza.the offset is et45 and the pcd is 4x100 so they will fit on rite. | |
ed |
posted on 14th Jun 05 at 21:24 |
quote:They lie. They are saying that because no one really makes ET 49 alloys. ET 49 is the ideal offset, 45 is good, 42 you can live with the odd bump every now and then, onec you get past 40 you're probably going to need to get trimming the arches away. Though there are people who say thwy have ET 38's and have no troubles. The only way to find out is to give them a go i'm affraid. | |
glennpanton |
posted on 14th Jun 05 at 18:14 |
depends on the width due to wider rim will need lower offset so does rubb inner part or arch! | |
goodfellow |
posted on 14th Jun 05 at 13:56 |
i was under the impression that et45 or higher will b ok for 17's on a 40mm drop.yet i'm bein told by this site that et40 has to b the offset cause they are alloy. | |
Tom_1.216v |
posted on 14th Jun 05 at 12:09 |
not sure, but as there wider than stellie's they may rub against suspenion | |
goodfellow |
posted on 14th Jun 05 at 11:09 |
i also had a reply from a website that sell alloys. | |
goodfellow |
posted on 14th Jun 05 at 09:54 |
rite i want to put 17's on my corsa as with the 15's i have on at the moment my bodykit sits about 1 inch off the floor. |