|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » temp dash display not working » Post Reply
|
Matt.H |
posted on 23rd Mar 05 at 17:39 |
quote: did this at the weekend and now works. | |
Rileysport |
posted on 23rd Mar 05 at 11:31 |
^^ Spot on :thumbs: | |
Greasemonkey |
posted on 23rd Mar 05 at 10:54 |
Mine did this i replaced the sensor but still didnt work, the problem with the MFD is the plug in the back of them over time sometimes loosens the pins from the circuit board and they need re soldering, i did this to mine its very fiddly but fixed it a treat | |
K2 GTi |
posted on 23rd Mar 05 at 10:34 |
Yes that it I think. It's like a round black thing right? | |
and-m |
posted on 23rd Mar 05 at 10:23 |
Sounds like it, its attached to the vertical metal section in the middle. | |
K2 GTi |
posted on 23rd Mar 05 at 10:01 |
Is it the black thing that hangs? Or is that something else? | |
Richie |
posted on 22nd Feb 05 at 11:39 |
you dont need to do that much work to get at it, you access it through the grille of the bumper..... | |
stevenford_uk |
posted on 22nd Feb 05 at 11:36 |
mine was a pop to get to, i took off front bumper and rad, then replace it, refit and fill with water. bout half hour in all but a lot easier than faffing round in a small space | |
Ian |
posted on 22nd Feb 05 at 00:53 |
Up from underneath? | |
Kyle T |
posted on 22nd Feb 05 at 00:37 |
I've got the same probllem with mine. I found the sensor but I cant get to the flaming thing. | |
Ian |
posted on 22nd Feb 05 at 00:04 |
Replace the sensor, mounted behind the lower grille in your front bumper. | |
GaMbLe_SxI |
posted on 22nd Feb 05 at 00:04 |
the outside temp thermometer thing on the display on my centre consol int working all it says is - - c anybody know how to get it working :boggle: |