|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » x14xe > x20xev wiring » Post Reply
|
James R |
posted on 13th Jan 05 at 20:21 |
(C)20XE (150)156BHP/150Lbs | |
Adam_B |
posted on 13th Jan 05 at 19:56 |
XE for me btw | |
Adam_B |
posted on 13th Jan 05 at 19:54 |
about 20bhp | |
Dom |
posted on 13th Jan 05 at 19:39 |
what is the difference between the two anyways? :) | |
mentalasanything |
posted on 13th Jan 05 at 19:32 |
ttt | |
corsaandy |
posted on 9th Jan 05 at 20:14 |
xe definitely no question | |
mentalasanything |
posted on 9th Jan 05 at 19:51 |
quote: Ive thought of the idea of a Redtop but to find a good one with low milage is gunna be hard, x20xev's though are more readily availible and younger! Poll : What do u all rekon? x20xev or c20xe? | |
James R |
posted on 9th Jan 05 at 14:01 |
Yep you'll need to swap enbgine looms and then plumb the car loom to the ecu loom, live, fuel pump, switched live, tacho. | |
jr |
posted on 8th Jan 05 at 21:23 |
yes, as half the sensons on the 1.4 loom wont ply into the x20 for a start | |
mentalasanything |
posted on 8th Jan 05 at 17:59 |
even though they are both ecotecs? | |
Mattb |
posted on 8th Jan 05 at 17:45 |
you will need to change the engine wiring looms, and there are about 10 or so wires that need connecting up, its note too hard ;) | |
mentalasanything |
posted on 8th Jan 05 at 17:25 |
If I were to fit an x20xev in to my corsa b 1.4 16v sport (x14xe) will the car need re-wiring, bearing in mind they are both Ecotecs? Any help appreciated! |