|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » 1.0L 12v to 1.6 16v...... » Post Reply
|
Siberia |
posted on 8th Nov 04 at 15:42 |
hmmm sounds like a pain in the gee....:o | |
CRB 553 |
posted on 8th Nov 04 at 15:20 |
I did this type of conversion and i now have a mix of 1.0 12v loom, (original wiring used for sensors speed, temps, etc) and the 16 engine loom used for all ecu controlled aspects. Had to wire fuel pump in separetely. | |
Cybermonkey |
posted on 8th Nov 04 at 11:44 |
im thinking thats true. Different plugs because ECU differed entirely for 3 cyl engine. | |
Richie |
posted on 8th Nov 04 at 11:42 |
I dont think it will be plug and play with the 1.0 12v as the plugs are different ( i think) u2u2 J100RSA or Beardy | |
Siberia |
posted on 8th Nov 04 at 10:01 |
ah yeah.. the engine loom will be going and the 1.6 engine loom will be going in.... | |
Richie |
posted on 8th Nov 04 at 09:51 |
i only just realised that he asked about the body loom aswell :lol: sorry bud | |
Cybermonkey |
posted on 7th Nov 04 at 06:05 |
quote: Like you said before, engine loom has nothing to do with car loom except for the interfacing, all the wires for lecy windows are still going to appear in the correct places etc etc | |
Richie |
posted on 6th Nov 04 at 08:09 |
the engine looms are totally different cyber. On the 1.0 12v and 1.2 16v engines, the ECU is totally different, and is mounted on the side of the engine, meaning all the ECU loom is in the engine bay. | |
Cybermonkey |
posted on 6th Nov 04 at 06:45 |
quote: I was actually talking about the spec levels rather than engine choices though. And there is no reason why a 1.0 12v LS/GLS shouldnt have the same loom as a a GSi. | |
Siberia |
posted on 5th Nov 04 at 23:20 |
i already stuck one of these engines in my 1.2 8v | |
Greg_M |
posted on 5th Nov 04 at 20:12 |
yes rab i want this too unless your guna get your tools (and your dad) out and do it for me! | |
calidus |
posted on 5th Nov 04 at 19:20 |
i did do a ruff guide for my conversion when I first did it, I will see if I still have it on one of the computers- i did pics etc too | |
Siberia |
posted on 5th Nov 04 at 12:34 |
hmmm | |
welshdude |
posted on 5th Nov 04 at 10:44 |
http://www.corsasport.co.uk/board/viewthread.php?tid=158885 | |
Siberia |
posted on 5th Nov 04 at 10:25 |
i just noticed on the car in question that the speedo is electronic. | |
Richie |
posted on 5th Nov 04 at 10:20 |
1.0l 12v to 1.6 loom is totally different. | |
Cybermonkey |
posted on 5th Nov 04 at 08:29 |
body loom really depends on luck TBH, since all corsa B's were fitted with different looms, but it seems that the Merit got the bum deal with a lame loom, and models up from this got half decent looms with wires for windows, mirrors, C/L, heated seats etc, but there is no sure fire way of saying that you have the same loom as a 1.6, short of checking them both out for yourself. | |
Siberia |
posted on 5th Nov 04 at 08:08 |
Right whats needed? obviously the usuals engine, gearbox, shafts/hubs/cv's(maybe), ecu engine wireing loom. |