corsasport.co.uk
 

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » 1.6 16v Beast - peoples advice needed » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help

Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

RobHayes

posted on 8th Oct 04 at 18:33

i've got a tuned 1.6 16v too


ChrisD16v

posted on 8th Oct 04 at 18:32

Well i was looking at around the £1500 to £2000 mark, on the other hand though i might just buy the engine now (1.6 or 2.0) and spend 12months workin on it, tune it up.

Has anybody here had any engine balancing or blue printing done on the there engines cos av heard this is really beneficial when it comes to revvin it up. I have heard you can get upto 10,000 revs safely if eveything is done right!!!!!!


corsa120

posted on 8th Oct 04 at 18:16

a 1.6 with 160 bhp only just keeps with an xe corsa as donna and daimo proved

stick with 1.6 gr8 engines just 2.0 i think is a better starting point as u got spnd over 2000 quid to get 150bhp which xe already has for 1500, with 500 left over u should already have zorst/filter etc and u got 500 for remap etc if u like


miles

posted on 8th Oct 04 at 17:53

I would go the C20 route tbh, but I wouldn't pay anywhere near £1500 for the privilge!


Siberia

posted on 8th Oct 04 at 17:42

ive just installed a c16xe with a mantzel power box into my corsa and the thing fecking flys......

haven said that if i was aloud have a 2litre i would have gone down that route.


broster

posted on 8th Oct 04 at 17:34

quote:
Originally posted by Rhino
I wouldnt do a rear disk convertion, uprated front brakes would be better and rear durms are more than good enough!

You could prob get a 2ltr 16v in your motor for about 1500 quid supplied and fitted.
Tuning a red top is pretty easy and power and torque is good, easly tunnable as well. exhaust, and chip and you could be looking at 170 bhp.

On the other side a 1.6 16v is extreemly tunable, and acheiving 150bhp is realistic with a fully exhaust, exhaust manifold, inletmanifold and chip.

a 2ltr 16v is always goin to have more torque than a 1.6 16v, but i like then idea of tunning a 1.6, that why i did it. ;)

My 1.6 16v has full exhaust and the inlet manifold and is pretty close to keeping up with valver corsa's, hits the limiter in 5th as well.
If it was me i would stick with the 16..

Choice is yours...


id stick with the 1.6 too, i went from a 1.4 16v to a 1.6 16v, did the conversion and a few toher bits and bobs, very happy with the outcome. not come accross a valva corsa yet tho....


Rhino

posted on 8th Oct 04 at 16:14

I wouldnt do a rear disk convertion, uprated front brakes would be better and rear durms are more than good enough!

You could prob get a 2ltr 16v in your motor for about 1500 quid supplied and fitted.
Tuning a red top is pretty easy and power and torque is good, easly tunnable as well. exhaust, and chip and you could be looking at 170 bhp.

On the other side a 1.6 16v is extreemly tunable, and acheiving 150bhp is realistic with a fully exhaust, exhaust manifold, inletmanifold and chip.

a 2ltr 16v is always goin to have more torque than a 1.6 16v, but i like then idea of tunning a 1.6, that why i did it. ;)

My 1.6 16v has full exhaust and the inlet manifold and is pretty close to keeping up with valver corsa's, hits the limiter in 5th as well.
If it was me i would stick with the 16..

Choice is yours...


PaulW

posted on 8th Oct 04 at 16:01

Oh and ditch the K&N for a BMC CDA... :thumbs:


PaulW

posted on 8th Oct 04 at 15:58

1.6 16v tuning is fun ;)

best people to chat to on here will be broster, greasemonky & andy, as they all have tuned 1.6 16v lumps (except greasemonkey as his momma raised a fool cos he sold his car)

Easiest way to start, get a performance exhaust manifold, SBD sell some for around the £350 mark, and a mantzel power box, followed by a UniChip remap. Should be lookin around 130bhp mark there

follow with some cams & uprate a few bits here & there, possible of around 145bhp I reckon with that...

Or go down Andy's route... TB's...

SBD do a few kits for the 16XE engine, TB165 and TB185 kits (numbers represent the BHP mark) there best route to go but will cost you mega £££'s

2ltr is a bit front-heavy for the corsa, yeah ok you can get it set up perfectly, but the car would feel so much happier round corners if you tuned the 1.6 up


I'm lookin at tuning up my X16XE engine with either a fanimold like Broster & Greasemonkey, or go straight to TB's... Depends how much cash I can save up by next summer as will be when I do the work on the engine :thumbs:

[Edited on 08-10-2004 by PaulW]


tobyD

posted on 8th Oct 04 at 15:50

Alrite chris,
nowadays a 2.0 16v conversions are the most popular route, u can get them done fairly cheaply:
eg - you can pick up a red top engine + g/box for about £500, but dont forget you will need to change the clutch, brakes (rear discs too), possibly an Lsd etc etc. you may think this is a bit too expensive but you will get 150+ bhp just like that and work up to 170bhp v.easily with just a chip (u already have induction kit and exhaust).
If you stuck with the same engine, the most you can really do is chip, induction kit, exhaust whch will be cheap but only expect to get 120bhp max, then your into the lines of throttle bodies, nos etc which is an expensivbe route for what it is.
my advice would be a 2.0ltr conversion which will set you back a bit, but if you think of all the benefits, max speed, easy tuning, higher torque levels etc, it is a worthy investment, and to say you a got a 2.0ltr corsa...well, you would be the daddy.


ChrisD16v

posted on 8th Oct 04 at 15:33

anybody?????


ChrisD16v

posted on 8th Oct 04 at 15:06

Right i need some advice i am thinking of either gettin a conversion or tuning my car early nxt year. If i went down the route of tuning the car what sort of power could i expect to get, and what sort of performance would this give me. Bearing in mind i already have a full stainless steel custom exhaust and a k&n induction kit? Advice appreciated!!:thumbs: