|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Engine Help needed. » Post Reply
|
MJ |
posted on 9th Aug 04 at 10:19 |
dont know yet. | |
Mark Petty |
posted on 9th Aug 04 at 09:40 |
How many BHP should you gain once sorted? | |
Rileysport |
posted on 9th Aug 04 at 09:32 |
Shud still work as far as i know... ask the question mate:thumbs: | |
MJ |
posted on 9th Aug 04 at 09:15 |
but mine is a piper cam | |
Rileysport |
posted on 9th Aug 04 at 09:06 |
for a kent cams one: http://www.larkspeed.com/index.pl?c=KENTPULLEYALOY | |
MJ |
posted on 9th Aug 04 at 09:02 |
where can i get a pulley from as i cant find one. | |
PaulW |
posted on 9th Aug 04 at 08:55 |
could also be fueling, as there is only 1 injector remember... | |
MJ |
posted on 9th Aug 04 at 08:45 |
how its running at the moment is undrivable to get the revs up takes years. i think it is the timing disc as the engine is getting hotter. the cam is only a fast road cam so its not that much more wild. | |
Kris TD |
posted on 9th Aug 04 at 08:11 |
as grease monkey said. | |
Greasemonkey |
posted on 9th Aug 04 at 08:08 |
Dont forgett that a performance cam will lose you low down power. If its wild enough it will mess with i idle also, Ya have to get the revs up before the cam gains kick in but still you will only be looking at a few horses | |
MJ |
posted on 8th Aug 04 at 21:13 |
ttt | |
MJ |
posted on 8th Aug 04 at 19:47 |
yer all the valves are correct and they have be grounded in, all seals and gaskets have been replaced. tapets have been cleaned and every think been put back from where it come out from. | |
Rileysport |
posted on 8th Aug 04 at 19:35 |
have u got the valves done right?, did you replace tappets etc or move em around... the need to go back where they came from, or be replaced with new:thumbs: | |
Adam-D |
posted on 8th Aug 04 at 19:28 |
you may need a piper adjustable pulley that needs to be set up on a roling road | |
MJ |
posted on 8th Aug 04 at 18:57 |
I recently fitted a Piper Camshaft Kit KBV 13270H to my Vauxhall Corsa 1.2 8 Valve C12 NZ engine 1994. I fitted new Valve Springs and lapped in the Valves. |