|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » just bought 1.6 16v engine » Post Reply
|
miles |
posted on 31st Jul 04 at 17:54 |
I hope you didn't pay much as getting a useable ecu, loom and inlet manifold wont be cheap or easy... | |
snottysnowy1 |
posted on 31st Jul 04 at 17:34 |
thanks ill look into that.. | |
Adam-D |
posted on 31st Jul 04 at 17:24 |
no you need a ecu and transponder chip and ring that are all from the same car or it will never work | |
snottysnowy1 |
posted on 31st Jul 04 at 17:23 |
not sure to be honest..ill have to check..ill get a haynes manual for the engine and check over...i know i dont have the inlet manifold ...i think ill get the ecu and loom as one unit...can i not get it to work with my keys for the immobiliser? | |
miles |
posted on 31st Jul 04 at 17:06 |
You could use your current gearbox, although the F15/13 would be better. | |
Big Col |
posted on 31st Jul 04 at 16:30 |
the key from the donor car | |
snottysnowy1 |
posted on 31st Jul 04 at 16:18 |
i have v6 brakes on already... engine mounts are ok apparently and the driveshafts are meant to be ok too...someone who done same conversion told me this..any info is appreciated | |
topshot_2k |
posted on 31st Jul 04 at 15:54 |
brakes, driveshafts, better engine mounts?? | |
snottysnowy1 |
posted on 31st Jul 04 at 13:21 |
ok just bought the 1.6 16v ecotech engine (thats all)..i just need to know what else i will need for the conversion from 1.2 8v...i need the gearbox ecu, wiring loom what else please?? thank you |