colour is same as full car

colour seems a bit OTT

mine

taking it outs not the problem, its getting it back in without fucking the paint and getting loads of squeeks.

only thing i'll be spraying is the shell inside & out

results look quality tho - i mean respraying your whole dash rules!

quote:

---

Originally posted by PaulW

---

Make it a MRWD Paul

quote:

---

Originally posted by Adam-D
put it this way if u can undo it
you can redo it
just lay the bits out on paper in the order that you took it off ten reverse to re-fit

---

that looks like a job and a half paul!! you got something special planned for it then?
think i might have a crack at doing the full dash.

put it this way if u can undo it
you can redo it
just lay the bits out on paper in the order that you took it off ten reverse to re-fit

i've not put the dash back in so wouldnt know about difficulty on re-fitting, but here is latest pic, i'm re-doing all wiring so is why its been removed

wiper motor & scuttle is pish to remove & refit though!

think the biggest problem you will have when re-fitting the dash will be trying to get all the wiring to fit as it was before you removed it,

yah the wiper has 3 bolts on it under the scuttle then un-clip the wiring ant the motor will cumout u will then c the bolts behind it

is that hard to take out then? will it go back easy enough?!

to get the full dash out u will have to m8 as there r 4-5 bolts behind the the wiper motor

fuckin hell! that looks complicated!
at the moment i have all the bits like the mfd,centre console,glovebox,vents out,just not too keen about taking the scuttle and wiper motor out!

my corsa van looks like that bloody mess but well worth it

remove steering wheel
remove dials
remove center console
remove all switches n such
remove glove box & all air ducts
remove ashtray
unscrew fuse box, all wiring harnesses & any other screws you find
open bonnet
remove scuttle
remove wiper motor & mechanism
undo all bolts within bulkhead
back in car
just keep pulling now if all bolts are undone, it will come out
just takes time like adam says

and this is what it will look like once you've removed it




you feeling brave??

is there much wiring and airvent ducting stuff?

not hard just a matter of lots and lots of unscrewing stuff
takes a little time

im thinking of doing this to mine so i can spray the full dash,just wondering how hard it is to do,do i have to take a load of electrics out? will it be easy to fit back in afterwards?!:wave: