|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » 20xe running but couple of fault codes » Post Reply
|
clarkie |
posted on 1st Jan 04 at 23:45 |
well im only an aprentice so i often get things wrong, but as we've had an 'update' it might well be the engine speed sensor, if the ecu doesnt know how fast the engine's spinning it wont be able to aply the right mixture so it'll run on a set value. | |
Adam_B |
posted on 1st Jan 04 at 23:37 |
i didnt say it would, u probly know more than me but that code number 31 is one ive had and thats how i fixed it :) | |
DP. |
posted on 1st Jan 04 at 23:34 |
sorry adam.. you were right! the first two were 12 and 13. I have updated the post. | |
clarkie |
posted on 1st Jan 04 at 23:29 |
but i doubt that would cause all those faults. if the engine ran well with no fault codes in the previous car, its very unlikely that all those componants broke when mounting it in your car. | |
Adam_B |
posted on 1st Jan 04 at 23:21 |
i think by the first 2, 21 + 31 are supposed to be the othere way round like later. 12 + 13, as it always does 12 first. | |
clarkie |
posted on 1st Jan 04 at 23:15 |
a few trapped wires? if you've caught a few wires they might be shorted to each other causing current to flow down the wrong wires. or maybe bent pin on the ecu, causing the same to happen. | |
DP. |
posted on 1st Jan 04 at 23:08 |
Finally finishd my corsa gsi 20xe conversion yesterday and took it out for a spin :) However, when starting today and taking it out for another spin it didn't seem to be quite right. Kinda felt like it was only running on 3 cylinders when started and had to rev it quite a bit initially otherwise it would cut out. When driving it seemed to he hesitant at times off and on and ecu light flashed on a couple of times. |