|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » corsa b v6 - brakes are shocking help » Post Reply
|
one-mr-t |
posted on 8th Jul 11 at 17:35 |
My mate was thinking the master cylinder aswell will get one on weekend thanks lads | |
barnsey boy |
posted on 8th Jul 11 at 17:03 |
exactly the same thing happened to mine last year pushed the brake pedal to the floor and nothing much happens, i changed the master cylinder for a new one and that fixed it, hope this helps. | |
Crana |
posted on 8th Jul 11 at 16:49 |
I have the same problem :( | |
one-mr-t |
posted on 8th Jul 11 at 16:46 |
No leaks that I know off the brake fluid level has stayed the same since I blead them up the other day. The brakes are that bad I was pushing the pedal down as hard as I could when I was driving and it wasn't doing very much. The brakes on my brothers mk2 fiesta are better! | |
AlexW |
posted on 8th Jul 11 at 16:21 |
I think I'm correct in saying all servos on corsa's are the same, Either way its the servo that helps you push the pedal, if it was lacking it would make the pedal hard, not easy to push right to the floor like the issue you are having. | |
one-mr-t |
posted on 8th Jul 11 at 16:12 |
Yeah calipers are right way up, disks and pads are like new, unsure how the back shoes are but the hand brake locks up good. Could it be the brake servo because that's the standard 1.2 8v one? | |
Gary |
posted on 8th Jul 11 at 14:57 |
Might sound silly, but are your calipers the right way up? Bleed nipple to the top. | |
reecegsi |
posted on 8th Jul 11 at 14:47 |
I would upgrade brakes to ones off a v6??? Cheap and easy to change | |
one-mr-t |
posted on 8th Jul 11 at 09:15 |
Ok will try that over the weekend | |
Eddx14xe |
posted on 8th Jul 11 at 09:07 |
Could be the rear adjusters. | |
one-mr-t |
posted on 8th Jul 11 at 08:31 |
Got a corsa b with c25xe fitted, I think the front brakes are 256mm 2.0 brakes on the back are drums. The brake pedal sinks to the floor and it doesn't want to stop, I've blead the full system blead each corner individually, when the engine is turned off and you pump the brake pedal it goes hard, but as soon as you start the engine with your foot on the brake pedal it just sinks again. Can anybody help please? |