|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Calibra Leather seats Into A Corsa B - Problem Time **NOW WITH PICS** » Post Reply
|
fazza |
posted on 7th May 08 at 13:12 |
will probably need a centre punch with a hammer to make an indent itno the metal to use as a pilot hole then start with a small drill and then go upto the required size to drill them out. | |
joes_1.4_16v_sport |
posted on 7th May 08 at 13:10 |
Any tips with drilling? :boggle: | |
joes_1.4_16v_sport |
posted on 6th May 08 at 09:19 |
Ahh crapper :( | |
pow |
posted on 6th May 08 at 08:37 |
quote: | |
Ste L |
posted on 5th May 08 at 22:16 |
quote: me neither :boggle: | |
Linch |
posted on 5th May 08 at 22:12 |
Never seen them like that before, the ones I got were out of a J reg cally and had bolts holding the base of the seat to the frame, they out of a later model? | |
joes_1.4_16v_sport |
posted on 5th May 08 at 22:03 |
Anybody? | |
joes_1.4_16v_sport |
posted on 5th May 08 at 14:35 |
there like dead bolts / not like allen keys, torque bits, spanners / sockets... | |
fazza |
posted on 5th May 08 at 14:23 |
u will have to drill them out by the looks of it mate | |
joes_1.4_16v_sport |
posted on 5th May 08 at 14:22 |
Help on how they should look like people? | |
pow |
posted on 3rd May 08 at 19:15 |
| |
joes_1.4_16v_sport |
posted on 3rd May 08 at 19:06 |
told you ... :rolleyes: | |
pow |
posted on 3rd May 08 at 18:59 |
Oooooo err, wheres the bolts? | |
joes_1.4_16v_sport |
posted on 3rd May 08 at 18:18 |
Could anybody pin point exactly which 1? :( | |
joes_1.4_16v_sport |
posted on 3rd May 08 at 18:15 |
Pics coming soon... | |
pow |
posted on 3rd May 08 at 17:51 |
Turn the cali leathers over so that your looking at the bottom of the seat. Find the four bolts that attach to the bottom rgw seat to the subframe and undo! | |
joes_1.4_16v_sport |
posted on 3rd May 08 at 16:51 |
I'll have a look now... :boggle: | |
haydenover |
posted on 3rd May 08 at 16:50 |
Hi mate the seat will un bolt from the sub frame 4x bolts | |
joes_1.4_16v_sport |
posted on 3rd May 08 at 14:15 |
Ive printed that out... | |
VegasPhil |
posted on 3rd May 08 at 14:07 |
Ash did a pretty good tutoriol mate. Might help ya :) | |
joes_1.4_16v_sport |
posted on 3rd May 08 at 14:03 |
1>What I planed is... Corsa B 1.4 16v Sport seats out / Calibra Leather in... |