|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » x16xe dblias inlet manifold questions » Post Reply
|
ryan_fowler1985 |
posted on 26th Oct 07 at 18:08 |
anychance you can meaasure how long the bolts are for me so i can get some from work? is it really that bad lol | |
p1723944 |
posted on 26th Oct 07 at 15:43 |
Good Luck Ryan ! | |
ryan_fowler1985 |
posted on 25th Oct 07 at 23:50 |
any idea on the bolt size needed, i think they are m6 but any idea on the length so i can get some. may be able to sort you out if still in need when ive fitted mine hopefully next weekend | |
ryan_fowler1985 |
posted on 25th Oct 07 at 22:41 |
no bolts with it but work in a factory so will order some from a toling company if i cant get them off the shelve at a local supplier | |
matt_aka_smiler |
posted on 25th Oct 07 at 16:13 |
are the bolts with it?? my mates having a right mare trying to get hold of them :( | |
ryan_fowler1985 |
posted on 24th Oct 07 at 23:11 |
ok thought so just wanted to check evrything b4 i fit it. hopefully i can get everything together b4 it arrives ready to swap. just gotta get some gaskets and vacuum pipes then | |
matt_aka_smiler |
posted on 24th Oct 07 at 22:40 |
thats in the throttle body mate so its moved with it. The standard wires can be moved across according to Warrens guide, but i extended mine with wire that came with my dbilas | |
ryan_fowler1985 |
posted on 24th Oct 07 at 22:26 |
the idle control valve stays as is then yes? as does the egr unless i choose to blank it which i mite do as mine is fucked anyway. | |
matt_aka_smiler |
posted on 23rd Oct 07 at 22:37 |
the EGR isnt blanked off with a Dbilas mate the EGR is at the back of the engine never blanked mine off. In Warrens guide, the egr valve has been taken off in picture 10 | |
ryan_fowler1985 |
posted on 23rd Oct 07 at 21:39 |
? | |
ryan_fowler1985 |
posted on 23rd Oct 07 at 16:59 |
what blanking plate will be used for the egr then, wont the usual place it bolts to on the throttle body be removed? would i just use a piece of plate with a gasket and bolt it to the bottom of the egr then? | |
matt_aka_smiler |
posted on 23rd Oct 07 at 16:11 |
that blanking plate sounds like the one that sits where the throttle body used to at the side of the engine | |
ryan_fowler1985 |
posted on 23rd Oct 07 at 16:08 |
is the triangle shaped plate the piece that blocks the egr? i think all that the kit consists of is gaskets which are availible from vauxhall. bolts, and blanking plate of some sort. | |
GSi Ghost |
posted on 23rd Oct 07 at 16:02 |
ive got the same problem mate, got the DBilis, but no fitting kit!! lol | |
Dean_W |
posted on 23rd Oct 07 at 15:55 |
EGR Valve usually has a feed going into the inlet manifold. Or, block it off with a blanking gasket. | |
ryan_fowler1985 |
posted on 23rd Oct 07 at 15:51 |
spot on, just what i was looking for. | |
Adam-D |
posted on 23rd Oct 07 at 09:17 |
check my garage, my 1600 sport | |
Dean_W |
posted on 23rd Oct 07 at 08:01 |
http://www.corsasport.co.uk/board/viewthread.php?tid=362354 | |
ryan_fowler1985 |
posted on 23rd Oct 07 at 04:04 |
just bought one of these but it hasn't got the fitting kit. im after as many photos as possible from all angles please, need to figure out induction pipe tps wiring breather pipes, and throttle cable, any help much apprciated. thanks |