|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » changin pads and disc's on Corsa C » Post Reply
|
gilljonathan |
posted on 7th Mar 07 at 10:32 |
yea shouldn't be too bad mate...only a hours work... | |
craig20102010 |
posted on 7th Mar 07 at 10:26 |
aye well i will make sure i go get some copper grease today. she only had her brakes changed about a year ago so they should come off easy enough. | |
gilljonathan |
posted on 7th Mar 07 at 10:19 |
well good luck to you...just dnt do what i did...and took the brakes off in the evenin only to realise i had no copper grease...so had to go another day without a car | |
craig20102010 |
posted on 7th Mar 07 at 10:17 |
good stuff thats what we like to hear as im in a desporate state and i feel its my duty to do this for this girl lol cuz she is runnin on bear metal pads and disc's and one disc is suffering rather badly and im sure its illigal lol | |
gilljonathan |
posted on 7th Mar 07 at 10:11 |
yea the piston had closed up qutie alot on mine...lol i dint bleed either... | |
craig20102010 |
posted on 7th Mar 07 at 10:03 |
cheers and as for the caliper if i just push the pistons back slowly then this should also be fine i dont want to really go as far as bleeding the calipers. | |
gilljonathan |
posted on 7th Mar 07 at 09:56 |
remember to take the screw out of the disc which stops it swivelling on the hub... | |
gilljonathan |
posted on 7th Mar 07 at 09:55 |
just done this on mine...once you take the caliper off, and the caliper bracket the disc just slides towards you...however i had to use a rubber mallet and some force to get the disc free...once its off just remember to put copper grease on the hub and inside of the disc before you fit the new disc... | |
craig20102010 |
posted on 7th Mar 07 at 09:35 |
first just need to know will i come accross many problems when takin the Disc off. does it Slide over the top of the hub? any special tools needed? |