|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » bottom pulley, crank bolt » Post Reply
|
Dave A |
posted on 2nd Sep 06 at 09:01 |
remove the gearbox (10 min job) and remove one of the clutch cover bolts. stick a small screwdriver or strong drillbit through the hole (try and get the hole to about 11 o clock position) and there is a space in the block which the bit will slot into and lock the flywheel in place. | |
ryan_fowler1985 |
posted on 1st Sep 06 at 16:37 |
i got the same problem with a c20xe im rebuilding shoot wen u relise aint it. | |
RobHayes |
posted on 1st Sep 06 at 16:37 |
well, tried that, couldnt find any suitable metal :( leave it for tomorrow now i reckon | |
Cossie |
posted on 1st Sep 06 at 16:22 |
maybe it has some tread lock heat it a bit with hot gun ! | |
Sly_SRi |
posted on 1st Sep 06 at 16:19 |
You will also need the engine well secured, maybe wedge it against somthing and jam some planks in from either side. | |
Sly_SRi |
posted on 1st Sep 06 at 16:18 |
If you have the gearbox off then bolt a piece of metal onto one of the gearbox bolt holes and have it do it jams into the fly wheel tooth. | |
RobHayes |
posted on 1st Sep 06 at 16:06 |
how the fluck do i get it undone? |