|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » c20xe corsa gear linkage » Post Reply
|
alistairolsen |
posted on 20th Apr 06 at 07:56 |
ok, so the was a little white lite, I cut both linkages in half and joined them, extending the s shaped plate by 15mm at the same time, This left me with the corsa pinch bolt and nova selector rod. I just assumed you could use the whole nova linkage. Sorry! | |
alistairolsen |
posted on 19th Apr 06 at 22:33 |
I usd a nova linkage, and turned the plastic bit round like you do with nova conversions. | |
Adam-D |
posted on 19th Apr 06 at 21:58 |
ive sold that. | |
corsaandy |
posted on 19th Apr 06 at 21:58 |
use the corsa linkage but you either have to extend the linkage or use the standard corsa linkage and dont use the rear gearbox spacers (grind a small lip away on the rear gearbox mount, or by the mtech shortshift kit which saves all the fannying around and is well worth it in my opnion | |
Dave A |
posted on 19th Apr 06 at 21:56 |
ive always used the mtech short shift when doing conversions | |
Adam-D |
posted on 19th Apr 06 at 21:48 |
what linkage would you use on a corsa 2 litre 16v of what car? |