|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » lowering a corsa B? » Post Reply
|
Corsa E-Tec |
posted on 21st Mar 05 at 17:49 |
i couldn't get the top nut off the shock for sh1t( as the shock was turning with the nut) , so i brought a power wrench from argos (£15) and used that and worked a treat. | |
ArdenSXi |
posted on 21st Mar 05 at 16:49 |
I also needed a 16mm socket/spanner for the nuts at the top of the rear strut (you wont need this if its only springs your fitting) and the 3 nuts holding the front strut onto the bulkhead were 13mm on mine. :look: | |
RKS |
posted on 21st Mar 05 at 16:42 |
you will need spring compressors if all you have is lowering springs, if you have coilovers then you wont need the compressors | |
mjw_2k2 |
posted on 21st Mar 05 at 16:37 |
will i need spring compressors? | |
Rileysport |
posted on 21st Mar 05 at 15:45 |
you will need: | |
CoastalCorsa |
posted on 21st Mar 05 at 15:43 |
haynes max power book was all i needed oh an a nice sunny day and a few drinks | |
mjw_2k2 |
posted on 21st Mar 05 at 15:32 |
ive just bought a -40 mm spring kit, i want to fit them myself, what tools do i need, some sort of tutorial would be handy? |