corsasport.co.uk
  Not logged in [Login - Register]  
You Are Not Registered Or Not Logged In  

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » RCA leads » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help
Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

AdiSRI

 posted on 12th Nov 04 at 20:43

that box looks pretty damn good, hmm i know a m8 with a single RCA hu who wats to have sub and amp....

any idea how much it was?


Richie

 posted on 11th Nov 04 at 22:25

id say get a fusion 1/2 din size line driver/controller. Turns one set of preouts into 3. 2x high passes for front and rear, and a sub out

very handy piece of kit:



Not sure if you can pick em up anymore but ive seen some left in shops :thumbs:


Dom

 posted on 11th Nov 04 at 22:17

quote:
Originally posted by mrpbailey
but can i not bridge it all onto the speaker outputs from 1 of the RCA things? wot effevct will that have?

whats the score with the RCA splitters? 2male - 1femal n stuff like that, which do i need?
how could i just run 6x9's and a sub with highest possible power?


if you only have a 1set of preouts from your HU mate, then i would invest in a line driver (thinks thats the name) where it takes in one input, and splits into X outputs - but also increases the gain on those X outputs to keep the signal as strong as poss for the amp :thumbs:

like adi said, using a splitter or one of those ^ jobbies, means that you wont beable to use fader/balance controls. Only way to avoid this is to replace the HU etc :thumbs:


mrpbailey

 posted on 11th Nov 04 at 22:03

but can i not bridge it all onto the speaker outputs from 1 of the RCA things? wot effevct will that have?

whats the score with the RCA splitters? 2male - 1femal n stuff like that, which do i need?
how could i just run 6x9's and a sub with highest possible power?


AdiSRI

 posted on 11th Nov 04 at 19:03

no u need a hu with 3 pre outs really, otherwise all the speakers will play the signal from whichever output u use on the hu.

u will have no fader front to rear....


neiliosxi

 posted on 11th Nov 04 at 18:51

ideally u need a headunit with 3 preouts, but if u are only running 4 channels then u can use a y splitter. get 1 off ebay for £1


mrpbailey

 posted on 11th Nov 04 at 18:47

its confusing cos its up to 6 channel
the RCA r labeled 'front' 'rear' and 'sub'. i can only run 1 set from my head unit.


neiliosxi

 posted on 11th Nov 04 at 18:40

1 could be a line out mate, u should have 2 sets to a 4 channel amp, the splitters rnt the best way to go but can be used.


mrpbailey

 posted on 11th Nov 04 at 18:31

my 1100W amp has 3 lots of holes for RCA leads, but i only have 1 set. When i wire it up i can only get power to the speakers that my rca's r plugged into, say the sub............ do i need RCA cables that split off into 3 sets or is there a special way of wiring it up?
i wanna run a sub, rear speakers and front speakers thru it