|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » C16XE-C20XE Not The Usual Guys » Post Reply
|
Fad |
posted on 7th Aug 04 at 09:30 |
quote: i was goin to point this out :lol: good luck! :thumbs: | |
Greasemonkey |
posted on 6th Aug 04 at 22:31 |
oh yeah when i say C20XE GSI i mean C20XE'd Corsa GSI lol | |
Greasemonkey |
posted on 6th Aug 04 at 22:30 |
Dont need fitting kit, the donar car has it, which i will be using | |
big eck |
posted on 6th Aug 04 at 20:29 |
Just remember you'll need the conversion kit plus the bracket for the PAS pump if your keeping it, also i'm not sure if the kit has the brackets for lowering the anti roll bar. | |
Ian |
posted on 6th Aug 04 at 18:10 |
If this isn't a daft question: why? | |
MoNkEy MaGiC |
posted on 6th Aug 04 at 17:13 |
aaahh so you going for the 2litre conversion then :thumbs: | |
Siberia |
posted on 6th Aug 04 at 15:46 |
2 sets of axels stands;) ermmm... i think you will still need a kitting kit.. well bits of it anyways(hubs.... maybe the driveshafts.... and 1 engine mount) | |
Greasemonkey |
posted on 6th Aug 04 at 14:35 |
sweet as man, this is so so so so so so happening | |
Rileysport |
posted on 6th Aug 04 at 14:33 |
1 or 2 mate:D | |
Greasemonkey |
posted on 6th Aug 04 at 13:57 |
yeah gonna need 4 sets of axle stands, a couple of trolley jacks, so it wil be straight foward then???, just straight swap, what about electrics, the C20XE into the C16XE GSI what needs doing, and is it easy to patch up the C20XE'd corsa for the C16Xe engine loom etc how many days should i give to do this | |
miles |
posted on 6th Aug 04 at 13:49 |
It should be easy enough, like 2 conversions. Make sure you have enough trolley jacks etc to balance things... | |
Rileysport |
posted on 6th Aug 04 at 13:40 |
I'd expect it to be the same as the normal conversion... minus brakes and suspension:thumbs: | |
Greasemonkey |
posted on 6th Aug 04 at 13:36 |
Right take one modifed C16XE'd GSI, then get a C20XE'd GSI put them together in one place and swap the engines over on the two, how hard is this to do, straight foward????, how long would it take me to do it. cheers guys:thumbs: |