|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » It doesn't fit ..... » Post Reply
|
Mistamist |
posted on 20th Feb 04 at 00:42 |
make your own, its easy, just get some correct diameter pipe cut out the centre box and couple of adapters and job dun. i did mine for total cost of £12 (including paste, tape and brackets) | |
MJ |
posted on 20th Feb 04 at 00:39 |
wot other manufactures do them | |
Joff |
posted on 19th Feb 04 at 22:16 |
I've had straight-through pipes that didn't fit, even though they were the part listed for a Corsa B. | |
MJ |
posted on 19th Feb 04 at 22:07 |
cheers guys, but other people have fitted them fine without no problems, i think i want a new pipe as it is no way near right. do any other compainies make straight through pipes | |
BabyBlade |
posted on 19th Feb 04 at 20:56 |
erm heard of people cutting the end near the cat to make exhausts fit before, duno why tho. | |
antscorsa |
posted on 19th Feb 04 at 20:38 |
maybe they sent u it for wrong cora like B shape instead of C , vice versa | |
MJ |
posted on 19th Feb 04 at 20:15 |
I have brought a sebring extreme back box and sebring striaght through pipe. i had a go at fittin it today and the striaght through is about 3" too long so it is hittin the cat. :mad: It seems like the flange on the end must move closer to the hanging hooks to fit onto the pipe inside the cat. Also it seems like the bend is not correct also as it is hittin the hand brake cable on the rear axle. Do u guys know wot could be the problem. Could it be that the pipe has been wrongly made. |