im going to put my plate into the centre recess also...

yeah that was my first move to fitting it. cut the bottom lip off. it should fit nice if i do that. and im a panel beater by trade thanks... havent started it yet tho. still working on PSG piece of total shit quality font bumper...

its an easy job, i just took my exhaust off as that was in the way of the bottom lip,
then i offered the bumper up, marked where it should sit, was level with the bottom recess of the old plastic bit on the old bumper
sikka flex it on, clamp it up, then filled the groove in, took to get sprayed, welded exhaust brackets on new angle so it would sit in the left hand pocket

also before fitting it where ru goin to put ur plate, and plate light. i made up some brackets and fitted it in the centre recess

i did mine myself with sikaflex, not that hard although was the hardest bodywork job av done..just gettin it lined up perfectly and clamped without it moving is a bit tricky.

yea i fitted mine. u shud chop the bottom of the old bumper off. y exactly wont it fit?

i got 1 off icy.in 2 bits though.had to smooth it in thought.not finished yet

doubt it mate not a diy job really imo so not many will have done it

anyone?

Hi everyone. finally got my car stripped and offered up new bumpers 2day. tho i set my reiger rear up to my old bumper and it really cant be that difficult to fit. ive got a feelin ive maybe received a pre 97 extension rather than a post 97. how could i tell tho and even so its been over a year since i bought the thing. tho im sure ill get it one some way or another... lol...