tomo2k9
Member
Registered: 17th Sep 09
Location: Birmingham/ wednesbury
User status: Offline
|
hey all iv just brought my first corsa (before that i had a saxo vtr) well i fancy a change and a little project, so i paid 400 pound for it done 83k runs sweet, but i would also like to go lower than it is and was wondering hoe much lower on the back can i go ??? heres a few pics oh and the silver wheel is a spear but same as the rest but need to spray it black 
|
tomo2k9
Member
Registered: 17th Sep 09
Location: Birmingham/ wednesbury
User status: Offline
|
oh and if i go lower how do i raise my exhuast because it is only about an inch of the floor let me no people thanks :y:
|
Minty_Fresh
Member
Registered: 1st May 08
Location: westmidlands
User status: Offline
|
you can go a hell lot lower all round dude, -80mm front -110mm rear is a nice stance (touch nose heavy which is good)
and for the exhaust trouble, have the middle silencer chopped out and have a straight through pipe put in, and when they weld it in just twist the exhaust around so it sits high and get some new exhaust rubbers, or even smaller ones..
job done..
you are right to go lower 
[Edited on 19-09-2009 by mk4_boy]
|
tomo2k9
Member
Registered: 17th Sep 09
Location: Birmingham/ wednesbury
User status: Offline
|
cheers for the quick reply mate and its 80mm on the back now and 60mm on the front so you say 80mm on the front and 110mm on the back is a good stance ??/ have you got any pics of corsa b cars lowerd that much would help alot mate, also wouldent putting a stright through pipe on a 1.0l just lose it power ????
|
Jake
Member
Registered: 24th Jan 05
User status: Offline
|
in my opinion it looks crap when the rear wheels are tucked right into the arch. to me, it looks best when the fronts are slightly tucked and the rear is slightly higher. try the 110mm shite but it looks like a fully loaded boot
|
tomo2k9
Member
Registered: 17th Sep 09
Location: Birmingham/ wednesbury
User status: Offline
|
i kinda like the slammed look its kinda grew on me i was suposed to slam my saxo but dident get round to doing it but i think they should make cars lowerd as a factory setting because they are to high when brought new, but does anyone no were i can get some rely low lowering springs ????
|
