Dom
Member
Registered: 13th Sep 03
User status: Offline
|
Anyone know if the wiring harness adaptor (eg: Autoleads wiring harnesses) used for the Corsa C are the same as the B's?
Just wondering if the Autoleads harness i have here for a corsa B will work when installing my Pioneer in my Corsa C.....
Tar 
|
sampayne21
Member
Registered: 3rd Sep 08
Location: Sidcup Kent Drives: BMW E46
User status: Offline
|
they are the same on the corsa b and corsa c up to about 53 reg when they changed it to can bus iirc,
but you didnt even have to purchase the wiring harness in the first place on pre 53 reg corsas, all you had to do is change the red and yellow lead around
also needs moving to help section
|
Dom
Member
Registered: 13th Sep 03
User status: Offline
|
quote:
Originally posted by sampayne21
they are the same on the corsa b and corsa c up to about 53 reg when they changed it to can bus iirc,
but you didnt even have to purchase the wiring harness in the first place on pre 53 reg corsas, all you had to do is change the red and yellow lead around
also needs moving to help section
I was always told B's needed a harness hence why i purchased one originally. Did just read up over on CorsaCUK about not needing a harness with C's, but didn't realise you didn't need one with B's though 
Cheers though
|
sampayne21
Member
Registered: 3rd Sep 08
Location: Sidcup Kent Drives: BMW E46
User status: Offline
|
its just a way for company's to make money, all you will need is the facia adapter on the corsa c.
also check to see if you have steering wheel controls as they wont work with an aftermarket radio without the right parts
|
