jav786
Member
Registered: 23rd Sep 03
Location: West Yorkshire
User status: Offline
|
C20LET/C20XE Rebuild parts
GM/Gates timing Belt Kit
GM oil Filter
GM Plugs
Steel Head gasket
Piston rings (STD size unless stated)
Mains bearings (STD size unless stated
Big end bearings( STD size unless stated)
Sump baffle plate with bonded gasket
Top end gasket kit All genuine GM/ elring gaskets used (with steel head gasket & steel exhaust gasket)
Bottom end gasket kit All genuine GM/ elring gaskets used (with Sump baffle with bonded gasket)
Oil Pump
Head Bolts
Water Pump
Cool running stat with housing
Please state if your engine is on the early round tooth set up or the later square tooth set up.
£450
New Forged C20LET Mahle pistons
86mm (std size)86.5mm In Stock 87mm to Order pistons £440 per set with Rings, pins & Clips.
If you need Piston's for the C20XE engine pm for price.
Cometic C20LET/C20XE/Z20LET Gaskets in Stock now
1.3mm £90
1.9mm £110
Can be made to any thickness if need be PM me for further information.
C20LET/ C20XE Engine core plugs £3 each 34mm & 36mm both in stock.
Can get Mains, Big end & flywheel Bolts/Stud kits if need be standard or ARP'S
ARP's now in Stock
C20LET/C20XE ARP head stud kit ARP Part Num 209-4301 £120
C20LET/C20XE ARP main stud kit ARP Part Num 209-5401 £100
C20LET/C20XE ARP rod bolt kit (Pro Series) ARP Part Num 209-6003 £85
C20LET/C20XE ARP rod bolt kit ARP Part Num 109-6001 £60
C20LET/C20XE ARP flywheel Bolt kit ARP Part Num 209-2801 £40
If you need an individual price for any parts just drop me a PM.
C20LET/C20XE Genuine GM/ Bosch Distributor cap & Rotor arm £65
C20LET/C20XE Genuine GM/ Bosch CTS Coolant Temp sensor £11
C20LET/C20XE Genuine GM/ Siemens Crank sensor £50
Oil spary jets set off 4 £40
C20LET/C20XE fuel reg take off plate to run an adjustable fuel regulator
comes with
new o rings
bolts
8mm push on hose conector
£30
7 1/4 inch flywheel
Garrett GT3071R Turbo with Tial Stainless V Band Housing
Garrett GT3071r
Turbine Housing A/R: .82
Style : Tial Stainless V Band Housing
External Wastgate
Compressor Inlet Diameter: 4 inch with Garrett Anti-Surge
Garrett GT3071R Turbo
Spec
Garrett GT3071r
Turbine Housing A/R: .63
Style : T3 Inlet 4 Bolt GT 3" Discharge External Wastgate
Compressor Inlet Diameter: 3
Spec
Garrett GT3071r
Turbine Housing A/R: .82
Style : T3 Inlet 4 Bolt GT 3" Discharge
External Wastgate
Compressor Inlet Diameter: 4 inch
Garrett GT3582R Turbo with Tial Stainless V Band Housing
Spec
Garrett GT3582r
Turbine Housing A/R: .82
Style : Tial Stainless V Band Housing
External Wastgate
Compressor Inlet Diameter: 4 inch with Garrett Anti-Surge Polished Housing
Tial Flanges & Clamps
50mm BOV Stainless steel Flange
GT Turbo Installation Kit
Kit includes
GT oil return flange and gasket
GT oil inlet fitting
2 GT banjo fitting kits for coolant lines barb fittings
Oil feed pipe with fittings
Oil feed fitting from Back off block to Oil line.
Tial 38mm Wastegate
Tial 44mm External Wastegate's
Tial 50mm Blow Off Valves
1mm oversize 1 peace forge valves
Double Valve Springs
platforms for double valve springs.
Double Valve Springs
Standard C20LET/C20XE Valves
Standard C20LET/C20XE Guides
Z20LET Oil pump with modified pick up pipe to fit the C20LET engine £
Modified Z20LET Oil pump pick up pipe can be made if your a running a block girdle as well.
Can also supply genuine GM Z20LET oil pumps at extra cost if need be.
JE Pistons (C20LET) with clips, pins, & rings 86mm 86.5mm 87mm Pistons can be made to your spec.
Total Seal Piston Rings
Steel Rods With ARP 2000 Bolts
Adjustable verniers made (Square tooth) made from lightweight aircraft aluminum then anodized red or blue. Can also supply early
round tooth verniers.
http://www.migweb.co.uk/forums/items-sale/323017-adjustable-verniers-made-square-tooth.html
£135 per set plus postage if need be about £10 next day special delivery.
Or £75 each postage if need be about £10 next day special delivery
Round Tooth also in stock
Engine Conversion Mounts
Astra G C20LET Conversion Mounts with F28 New
1x Timing Belt mount (will need square tooth belt set up)
1x Front F28 Gearbox mount left
1X F28 Gearbox mount front on Subframe
All Mounts Are Brand New then Powder coated in Gloss Black.
Rear gearbox mount part number (gm only) will be supplied.
Other engine conversation mounts, 2wd kits,Hubs, available contact for further information
£550 + postage if need be.
New Corsa C C20LET Conversion Mounts with F28
1x Timing Belt mount (will need square tooth belt set up)
1x Front F28 Gearbox mount left
1X F28 Gearbox mount front on Subframe
All Mounts Are Brand New then Powder coated in Gloss Black.
Other engine conversation mounts, 2wd kits,Hubs, available contact for further information
£550 + postage if need be
New VAUXHALL NOVA/ CORSA B 2.0 C20LET C20XE CONVERSION HUB £35 each + postage
Hub to suit 2.0 engine Corsa B and Nova. These hubs are manufactured to suit the bigger, and stronger 2.0L outer cv-joints.
16x Bronze Valve guides (C20LET/ C20XE) 11mm standard GM or Later coscast heads or
13mm for the early Coscast heads £120 per set.
Early Coscast head 13mm Guides
Late coscast head & all GM Heads 11mm guides
16 x Solid Lifters C20XE/C20LET made from EN42T £224 per set
Solid Lifter Shims £40 per set
GM/INA Hydraulic Tappets/ Lifters x16
C20XE/ C20LET Stainless Steel Engine Bolts
The bolts are made from high quality A2 grade stainless steel.
http://www.migweb.co.uk/forums/items-sale/313414-c20xe-c20let-stainless-steel-engine-bolts.html
What you will receive
9 rocker cover bolts and washers
2 spark plug cover bolts and washers
14 sump bolts and washers
3 Exhaust heat shield bolts and washers
3 Cambelt cover bolts and large washers
6 Crank pulley Bolts
6 Oil pump Bolts and Washers
4 Turbo cover Bolts & washers
£35 to your door in the U.K
F28 2WD Kit
Kit includes
1xF28 2wd Plate 4 bolt Type (no drilling or tapping needed with this kit just bolt on)
1x Drive shaft oil seal
4x bolts
4x washers
1x O ring for 2wd plate
1x Driave shaft spacer
C20LET Exhaust Stud Kit
KKK16 Turbo Kit
Kit includes
2x Springs
2x Copper Nuts
2x Studs
6x S.Steel Elbow bolts
Down pipe Gasket
£30
C20LET/C20XE Main bearing cap girdle 8mm Mild steel unskimmed £55
Flanges
Stainless Steel Garrett T3 style turbine inlet flange 10mm
Stainless Steel C20LET/C20XE/20XE manifold flange
Brand New Astra H Z20LEH VXR Turbo complete with maniford & Actuator. Ideal upgrade for the Z20LET Turbo.
£490
If you need any other parts just ask.
Tel 07962398027
Engine conversations, Engine rebuilds, Head Work, Custom fabrication, Performance Parts.
http://www.vox-all.com/
If you need an individual price for any parts just drop me a PM.
[Edited on 25-08-2009 by jav786]
[Edited on 26-08-2009 by DannyB]
[Edited on 15-09-2010 by jav786]
|
jav786
Member
Registered: 23rd Sep 03
Location: West Yorkshire
User status: Offline
|
Z20LET Oil pick up pipe for C20LET Engine
Made from S.Steel
Just an idea of what manifolds I have had done below.
|
jav786
Member
Registered: 23rd Sep 03
Location: West Yorkshire
User status: Offline
|
660cc Injectors@ 3 bar
High Imp
Bosch Style fitment no connector’s or plugs required.
850cc Injectors@ 3 bar
High Imp
Bosch Style fitment no connector’s or plugs required.
Aeromotive A1000 Fuel Pump, P/N 11101
This is the pump that started it all. Durable, reliable, good looking and it supports high horsepower. Perfect for the daily driver that doesn't run like a daily driver.
Fuel Injected Engines:
up to 1300 HP - naturally aspirated
up to 1000 HP - forced air induction
Carbureted Engines:
up to 1500 HP - naturally aspirated
up to 1200 HP - forced air induction
Aeromotive A1000 Injected Bypass Regulator, P/N 13101
Performance EFI regulators designed for medium to high horsepower applications. Both regulators feature Aeromotive's high-flow design, superb pressure control and legendary durability. On the street and at the track, these pressure regulators have logged more miles, more laps and more passes than any other performance EFI regulators in the world!
Aeromotive 100 Micron (ORB-10) Fuel Filter, P/N 12304
An inexpensive insurance policy to protect you investment.
Proper filtration is key to fuel system performance. Engineered filter soutions are required to achieve protection with minimum restriction. For 200 - 3,000 plus HP applications, our filter assemblies offer unmatched flow, ease of installation and maintenance, along with the impeccable machining and finish you've come to expect from all Aeromotive components.
• All filter assemblies feature an O-ring for positive sealing in high pressure applications.
• CNC-machined from 6061-T6 aircraft aluminum.
• All filters feature serviceable filter elements.
• All of our filters feature pleated elements. (Pleats provide more fi ltration area, resulting in the least amount of pressure drop.)
Aeromotive Fuel Pressure Gauges P/N 15633 0-100 PSI
Aeromotive carbureted and EFI fuel pressure gauges
Aeromotive's new fuel pressure gauges are compact and accurate with a 1-1/2" in diameter stainless steel case, a crisp, easy to read white face with black numerals and of course, the Aeromotive logo!
http://www.aeromotiveinc.com/
|
jav786
Member
Registered: 23rd Sep 03
Location: West Yorkshire
User status: Offline
|
bump
|
DannyB
Premium Member
Registered: 6th Feb 08
User status: Offline
|
Link has been removed as we have a seperate part of classifieds for External Links,but you could make a new thread in External Links containing the migweb if you please. 
[Edited on 26-08-2009 by DannyB]
|
jav786
Member
Registered: 23rd Sep 03
Location: West Yorkshire
User status: Offline
|
quote:
Originally posted by DannyB
Link has been removed as we have a seperate part of classifieds for External Links,but you could make a new thread in External Links containing the migweb if you please.
[Edited on 26-08-2009 by DannyB]
Thank's
|
immortal_til_i_die
Member
Registered: 7th Aug 08
Location: north east
User status: Offline
|
Spec
Garrett GT3582r
Turbine Housing A/R: .82
Style : Tial Stainless V Band Housing
External Wastgate
Compressor Inlet Diameter: 4 inch with Garrett Anti-Surge Polished Housing
price?
|
jav786
Member
Registered: 23rd Sep 03
Location: West Yorkshire
User status: Offline
|
quote:
Originally posted by immortal_til_i_die
Spec
Garrett GT3582r
Turbine Housing A/R: .82
Style : Tial Stainless V Band Housing
External Wastgate
Compressor Inlet Diameter: 4 inch with Garrett Anti-Surge Polished Housing
price?
pm sent
|
jav786
Member
Registered: 23rd Sep 03
Location: West Yorkshire
User status: Offline
|
bttt. for a Quick Reply tel 07962398027
[Edited on 15-09-2010 by jav786]
|
