PhilC
Member
Registered: 21st Jan 06
Location: Lancs, UK
User status: Offline
|
Last few days with the Fabia...
Opinions of new car?
|
antnee
Member
Registered: 30th Dec 07
Location: Cov Drives: Clio 197
User status: Offline
|
Petrol or diesel FR?
Either way will be a big step up in power from your 1.2/1.4
|
PhilC
Member
Registered: 21st Jan 06
Location: Lancs, UK
User status: Offline
|
1.4 petrol to 1.9 TDi
|
antnee
Member
Registered: 30th Dec 07
Location: Cov Drives: Clio 197
User status: Offline
|
So almost doubling in power and 2.5x the torque!
Mk4's are really nice, Im planning to get the Sport PD130 (same as FR except some trim bits) in the summer 
And get signed up on http://www.ibizaoc.com/forums/
|
Gareth F
Member
Registered: 16th Jan 08
Location: Location Location
User status: Offline
|
I had a bit of fun with the 1.9 Tdi FR in brighton the other day. Toss pot driving it though, pulling away was equal to my x16xe. Couldnt put it past me so pulled back in. Just out of interest what are the bhp figures?
|
pow
Premium Member
Registered: 11th Sep 06
Location: Hazlemere, Buckinghamshire
User status: Offline
|
Ummm i've pissed over a 1.6 Zetec S in a STRAIGHT LINE before, 130bhp, 200lb/ft standard, mine made 148bhp and 240lb/ft on the rollers.
|
Conway563
Member
Registered: 7th Jun 06
Location: Yate, Bristol
User status: Offline
|
Glad you liked it mate and from your U2U looks like you got a pretty good deal
Any plans for it?
And get some pics up
|
PhilC
Member
Registered: 21st Jan 06
Location: Lancs, UK
User status: Offline
|
No plans really...
Might consider a remap, but i'm a bit of a novice tbh.
How much could it gain before I'd have to start swapping out clutches etc?
[Edited on 26-03-2009 by PhilC]
|
Conway563
Member
Registered: 7th Jun 06
Location: Yate, Bristol
User status: Offline
|
Stage 1 remap would take it to 180-190BHP and about 285-300lb/ft
I've read that the standard clutches can take up to 300BHP but a lot depends on the driving style
[Edited on 26-03-2009 by Conway563]
|
John
Member
Registered: 30th Jun 03
User status: Offline
|
If it's the pd130 one it'll be 300 lb/ft and not 300bhp.
Pick a map that's not too agressive or the clutch will more than likely be slipping under full throttle in higher gears.
You'll be looking at 170 for normal remap with nothing else done.
If it's not a pd130 engine I'm probably totally incorrect.
|
corsa_nation
Member
Registered: 27th Dec 04
Location: Wiltshire
User status: Offline
|
A Stage 1 would generally take you up to the 170 - 180 area. The clutch will handle it, but the life will be reduced, especially if it is a higher milage car. You'll notice a massive difference between the ibiza and your Fabia. Both in engine performance and handling.
|
Conway563
Member
Registered: 7th Jun 06
Location: Yate, Bristol
User status: Offline
|
quote: Originally posted by John
If it's the pd130 one it'll be 300 lb/ft and not 300bhp.
Pick a map that's not too agressive or the clutch will more than likely be slipping under full throttle in higher gears.
You'll be looking at 170 for normal remap with nothing else done.
If it's not a pd130 engine I'm probably totally incorrect.
You are correct John. My mistake
|
John
Member
Registered: 30th Jun 03
User status: Offline
|
I'll also recommend cheap ebay postal remaps while i'm here.
|
PhilC
Member
Registered: 21st Jan 06
Location: Lancs, UK
User status: Offline
|
170 would give me a 0-60 of around 7.5?
|
John
Member
Registered: 30th Jun 03
User status: Offline
|
Probably not far off it.
|
PhilC
Member
Registered: 21st Jan 06
Location: Lancs, UK
User status: Offline
|
Semi.
Any recommendations of where to get that done and rough price?
[Edited on 26-03-2009 by PhilC]
|
John
Member
Registered: 30th Jun 03
User status: Offline
|
Here
I've had 2 cars done, one him and one from another guy on ebay.
My fabia with that guy there made 168 bhp and I can't remember the torque but it was good.
Rolling road guys apparently said it was an excellent map.
|
Badgersport
Member
Registered: 9th Apr 04
Location: Wolverhampton
User status: Offline
|
Good choice on the ibiza Fr
My old PD130 was remapped to 177bhp and 308lbft of torque
I went and left a deposit on my new pd130 yesterday and will be getting it remapped within a week of owning it.
Best money i have ever spent........on any car!
Ste
|
PhilC
Member
Registered: 21st Jan 06
Location: Lancs, UK
User status: Offline
|
As stated earlier, bit of a novice, so I have a few questions...
How does effect insurance and is there a great drop in MPG?
|
Badgersport
Member
Registered: 9th Apr 04
Location: Wolverhampton
User status: Offline
|
When i informed insurance it went up by £60 for the rest of the year.
As for MPG i feel mine got better. was still getting 65+ normal driving but as soon as you boot it the mpg will come down.
Lowest i have seen is 25mpg
Ste
|
PhilC
Member
Registered: 21st Jan 06
Location: Lancs, UK
User status: Offline
|
Just checked with my insurer (which is the cheapest I've found by about £100), they won't be able to insure any car with performance modification.
I guess that's that sorted then...
|
corsa_nation
Member
Registered: 27th Dec 04
Location: Wiltshire
User status: Offline
|
quote: Originally posted by PhilC
170 would give me a 0-60 of around 7.5?
It will indeed
|
Jay
Member
Registered: 26th Sep 04
Location: Liverpool
User status: Offline
|
quote: Originally posted by PhilC
Just checked with my insurer (which is the cheapest I've found by about £100), they won't be able to insure any car with performance modification.
I guess that's that sorted then...
They'll never know.
|
John
Member
Registered: 30th Jun 03
User status: Offline
|
My mpg has never went up in a remapped car, the computer has said it has but it's not really.
|
PhilC
Member
Registered: 21st Jan 06
Location: Lancs, UK
User status: Offline
|
quote: Originally posted by JayM
quote: Originally posted by PhilC
Just checked with my insurer (which is the cheapest I've found by about £100), they won't be able to insure any car with performance modification.
I guess that's that sorted then...
They'll never know.
I know... but i can't say that on a public forum...
|