lil_g
Member
Registered: 29th Oct 06
User status: Offline
|
Does anyone know it off the top of their head?
Want to see if my 288mm 4 stud discs need spiggott rings to fit them 
|
Anthony
Member
Registered: 2nd Nov 06
Location: milton keynes. Drives: 1.6 Sport
User status: Offline
|
56.6mm iirc
|
tom_simes
Show Staff
Organiser: South Wales
Premium Member
Registered: 12th Jan 05
Location: Undy, Newport Drives: Skoda Octavia vRS estate
User status: Offline
|
Are they off a Fiat Gregg?
My Fiat Coupe discs needed a thin spiggot to locate properly 
|
lil_g
Member
Registered: 29th Oct 06
User status: Offline
|
Not sure tom, I bought them off here as a set but they look like the black diamond set LMF sell.
Thanks jonesy
|
tom_simes
Show Staff
Organiser: South Wales
Premium Member
Registered: 12th Jan 05
Location: Undy, Newport Drives: Skoda Octavia vRS estate
User status: Offline
|
If they are black diamond, were they re-drilled or 4 stud from factory? The ones I had were 4 stud Black Diamond discs, and they were Fiat Coupe Turbo discs.
|
lil_g
Member
Registered: 29th Oct 06
User status: Offline
|
4 stud from factory mate
They've apparently come straight off a corsa, which makes me doubt what discs they are 
|
tom_simes
Show Staff
Organiser: South Wales
Premium Member
Registered: 12th Jan 05
Location: Undy, Newport Drives: Skoda Octavia vRS estate
User status: Offline
|
The ones I had came straight off a Nova, but the holes hadn't been elongated from the 4x98 PCD, and there were no spiggots - surprised they fitted on at all tbh!
I just drilled the holes out and got a pair of spiggots made up by a mate with a lathe, and they worked perfectly for about 8 months, until I warped them 
|
lil_g
Member
Registered: 29th Oct 06
User status: Offline
|
!
I'll go measure them then see if i can get any spiggotts that size
|
tom_simes
Show Staff
Organiser: South Wales
Premium Member
Registered: 12th Jan 05
Location: Undy, Newport Drives: Skoda Octavia vRS estate
User status: Offline
|
Check if there is a part number on them - mine did have as they were hardly used, and then I compared it to Black Diamonds website, which confirmed they were Fiat Coupe discs, and told me the centre bore too
|
Corsa_Scotty
Member
Registered: 8th Aug 07
Location: Scottish Borders
User status: Offline
|
I need to know this too i need spigot rings for my alloys
|
lil_g
Member
Registered: 29th Oct 06
User status: Offline
|
60mm centre bore and what looks like 4x100
|
Corsa_Scotty
Member
Registered: 8th Aug 07
Location: Scottish Borders
User status: Offline
|
well my alloys are 73 centre bore and i only have the 65.1mm spigots from the C2 so i need 56.6 ones made
|
tom_simes
Show Staff
Organiser: South Wales
Premium Member
Registered: 12th Jan 05
Location: Undy, Newport Drives: Skoda Octavia vRS estate
User status: Offline
|
Did you measure that with a pair of vernier callipers Gregg, or by eye using a ruler? I'd be willing to put money on them being Black Diamond KBD076 or KBD476.
Both Fiat Coupe Discs, both 284mm diameter, 22mm thick, both 4x98 PCD, but the 076 have a centre bore of 59mm, while the 476 have a centre bore of 58mm.
Take a look through their catalogue and fitment guide:
Fitment Guide (drop-down box on right)
Catalogue with disc measurements
Scotty, what are the manufacturers of the alloys? I'd either contact them directly, or Halfords should be able to order a fitting kit - from when I worked there, we had quite a few on the shelf.
|
