Carl Gillespie
Member
Registered: 15th Feb 08
User status: Offline
|
Does any body know how to remove the swirly marks left on black paint work (and other dark colours) because of car washes etc??
A friend of mine told me there were cleaning products available to remove these.
Is this true?
If you had this problem how did you get rid of them?
Cheers
|
LukeD
Member
Registered: 23rd Jan 07
Location: Shropshire
User status: Offline
|
Have a Mop at a bodyshop mate! near good as new!
|
Adam
Member
Registered: 1st May 01
Location: Hurstbourne Tarrant
User status: Offline
|
either mopping it with a very light finishing compound or you could give it a go with a clay bar
|
Carl Gillespie
Member
Registered: 15th Feb 08
User status: Offline
|
How much is it to get this done??
I would be very interested as i am a bit of a perfectionist tbh.
|
paul.mitchell1984
Member
Registered: 31st Aug 06
Location: Wakefield
User status: Offline
|
clay bars dont take out swirls iirc they just clean the paintwork from debris after a wash ie tar, brid crap gets it smooth but leaves the swirls.
|
nova_gteuk
Member
Registered: 15th May 02
Location: South Wales Drives: The Bandwagon
User status: Offline
|
Use megiuiars scratch x in small patches at a time rub till the swirls are all gone,then some nxt wax.
|
Carl Gillespie
Member
Registered: 15th Feb 08
User status: Offline
|
This will take a long time though wont it, and ive had a look on ebay and a 207ml bottle is 7.99!!
Does this little bottle go a long way or will i need more than one to do my corsa b?
|
nova_gteuk
Member
Registered: 15th May 02
Location: South Wales Drives: The Bandwagon
User status: Offline
|
Ive used the bottle on two cars and theres still some left.
£7.99 is cheaper than paying a bodyshop about £80 to mop it,when you can do it for £7.99
Did take me about 4 hours on one car but was worth it imo.
|
mwg
Member
Registered: 19th Feb 04
Location: South Lakes
User status: Offline
|
If you are a perfectionist then for a pro detailer to do it you are talking anything from about £250 upwards.
Have a look on http://www.detailingworld.co.uk/
You could use Autoglym Super Resin Polish by hand and it would make an improvement but if you are looking for perfection you would need days and days and very strong arms doing it that way.
This is a good read if you are serious: http://www.detailingworld.co.uk/forum/showthread.php?t=10656
|
Carl Gillespie
Member
Registered: 15th Feb 08
User status: Offline
|
Well i dont want to be at it for days if im being honest, just improve the looks a little bit. And it would probable be a bit silly considering this is going to be my first car and im going to scratch it anyway probably and the cars only worth £1050.
Cheers for the links.
|
Adam
Member
Registered: 1st May 01
Location: Hurstbourne Tarrant
User status: Offline
|
Valeters near me charges £25 a panel.
But did watch them use 2000 grit followed but various grades of mopping compound the get rid of scratches on a brand new Audi S5. Wasn't a trace when they were done.
|
Graham88
Member
Registered: 16th Apr 07
Location: South East Kent Drives: E46 M3
User status: Offline
|
T-cut and elbow grease
|
mantamark
Member
Registered: 19th Jun 06
Location: Northumberland
User status: Offline
|
Electric drill with a duster on the end & some G3
|
mwg
Member
Registered: 19th Feb 04
Location: South Lakes
User status: Offline
|
Go for the Super Resin Polish then. You'll notice a good difference even if its not perfect. Then put a layer or 2 of some wax like Collinite on afterwards
|
Carl Gillespie
Member
Registered: 15th Feb 08
User status: Offline
|
What is this G3 stuff everyone seems to be talking about and where do i get it?
How much is the collinite wax?
|
dan_almond
Member
Registered: 27th Sep 05
Location: Salisbury, Wiltshire
User status: Offline
|
Where about are you from carl. Have a look at www.detailclassique.co.uk Explains it all mate!
|
loo_goblin
Member
Registered: 14th Jul 04
Location: Horsham, West Sussex
User status: Offline
|
use G10, its lighter than G3
|
chr15barn3s
Member
Registered: 5th Oct 03
Location: Farnborough
User status: Offline
|
As mentioned above. Autoglym super resin polish has fillers in so helps to hide the swirls. They wont go away but will not be so obvious.
|
Carl Gillespie
Member
Registered: 15th Feb 08
User status: Offline
|
Im from nothern ireland.
I've used the link above and its very good.
Ive priced most of the products and for the best mix of value and results Autoglym Super Resin Polish seems to be the best.
Am i rite??
|
mwg
Member
Registered: 19th Feb 04
Location: South Lakes
User status: Offline
|
Yeah go for that. Can get it from Halfords easy enough aswell.
Collinite Wax http://www.cleanyourcar.co.uk/wax/collinite-no-476s-super-doublecoat-auto-wax/prod_207.html
|
dan_almond
Member
Registered: 27th Sep 05
Location: Salisbury, Wiltshire
User status: Offline
|
SRP will do mate, but apply wax after polishing, or rainwater will run the SRP away. Alternatively, find a pro detailer in northern ireland. Im not sure whos over their, but theres got to be one somewhere.
|
JohnNI
Member
Registered: 16th Mar 06
Location: Northern Ireland
User status: Offline
|
collinite is a very good wax for the money, seems to last forever. Cleanyourcar is an excellent company, ordered off them a few times.
|
Carl Gillespie
Member
Registered: 15th Feb 08
User status: Offline
|
Happy days!!
So if i spend around £30 and an after noon i can get my car looking mint - cant be bad to that.
There is alot of black platic on the corsa b. My dad always used back to black to keep ours looking dark but i only ever lasted a few days.
I was just wondering if there was any more effective products on the market that are maybe longer lasting?
Cheers.
|
Graham88
Member
Registered: 16th Apr 07
Location: South East Kent Drives: E46 M3
User status: Offline
|
A better back to black. Mine used to last a couple of months before needing done again.
|
mwg
Member
Registered: 19th Feb 04
Location: South Lakes
User status: Offline
|
I used to use Autoglym Bumper Care. It was better than Back to Black but still needed topping up every 1-2 weeks.
|