burgess
Member
Registered: 22nd Feb 04
Location: Norton, North Yorkshire
User status: Offline
|
bought a dblias inlet but has no desructions!
just want a few pics of them to make sure I have it all there
especially the throttle cable if poss, looks like its fixed via a bracket attached to the lower inlet unlike a mantzel?
|
flybikeslee
Member
Registered: 2nd Jan 07
Location: Liverpool
User status: Offline
|
i also need this!!
|
Rob B
Member
Registered: 8th Jan 04
Location: Area Motorsport Drives: Race EP3
User status: Offline
|
yep its a fixed bracket mounted onto the manifold, sits like this..
|
flybikeslee
Member
Registered: 2nd Jan 07
Location: Liverpool
User status: Offline
|
right, can the original air filter hosing be used(retain sensor), and how do you relocate the throttle cable to it...
|
Scotty C
Member
Registered: 6th Nov 05
Location: Kidderminster Drives: 1.6 16v Sport
User status: Offline
|
No you need a diff induction hose (see mine)
just pull the throttle cable round to the new place..
|
Ben G
Member
Registered: 12th Jan 07
Location: Essex
User status: Offline
|
destructions  you want to blow it up
|
willhouse
Member
Registered: 11th Jul 06
Location: Sheffield
User status: Offline
|
throttle cable mounting- use the orgininal one on the throttle body, but you may find that you need to grind a fair bit off it and tie wrap the cable in place as mine hit one of the metal fuel lines-
induction hose- i managed to use the original one cut down and cut a new hole in it for the air temp sensor and sealed it with a good wrap of electric tape. and it is still fine to this day with a good 6k under its belt. 
|
burgess
Member
Registered: 22nd Feb 04
Location: Norton, North Yorkshire
User status: Offline
|
cool thanks for the help just couldnt work out where the throttle cable sat as its hidden in most pics
also looks like I will need a couple of studs and nuts to attach it to the lower inlet instead of the long standard bolts
also have a egr blanking plate by the look of it with a copper outlet on it
does this need piping back to the inlet?
|
burgess
Member
Registered: 22nd Feb 04
Location: Norton, North Yorkshire
User status: Offline
|
quote:
Originally posted by Monster
No you need a diff induction hose (see mine)
just pull the throttle cable round to the new place..
what induction hose did you use monster?
plenty of vauxhalls in the local scrap yard just looks like I need something off a cav diesel etc if it has a airtemp sensor 
|
burgess
Member
Registered: 22nd Feb 04
Location: Norton, North Yorkshire
User status: Offline
|
anymore pics? pref close up
thanks
|
burgess
Member
Registered: 22nd Feb 04
Location: Norton, North Yorkshire
User status: Offline
|
anyone have a pic of the said throttle cable bracket close up?
any help mucho app
|
