nathy_87
Member
Registered: 14th Aug 08
Location: West Mids. Drives: Škoda Fabia VRS 5J
User status: Offline
|
Right, i'll start again, due to last time:
Im new to modding cars and im after help big style; what i want to do is:
.get all the engine colour coded-were would i get parts from etc its a 1.4 16v
.i want the black plastic bits in flame red
.ICE in the boot
.alloys
.white clocks (with 4 clocks)
.spoiler
Can anybody help me please? ANY OTHER BITS I'LL ADD ON AT A LATER DATE..
EDIT: I've only managed to get sporty cover seats and a new head unit and some new speakers for the front!
[Edited on 09-02-2007 by nathy_87]
|
Sam
Moderator
Premium Member
Registered: 24th Dec 99
Location: West Midlands
User status: Offline
|
Help with what? Advice? Installation? 
|
STANNY
Member
Registered: 4th Jan 07
User status: Offline
|
Where abouts u from. If near Sheffield speak to Source Sounds, they are experts and do quality kit, MTX, Focal, etc.
|
nathy_87
Member
Registered: 14th Aug 08
Location: West Mids. Drives: Škoda Fabia VRS 5J
User status: Offline
|
installs, sorry, i know what stuff to buy ive got it all lined up just wonderign were to nuy the colour coded stuff for the engine, and im from Uttoxeter in Staffordshire
|
RKS
Member
Registered: 2nd Mar 04
Location: Gloucestershire UK
User status: Offline
|
quote:
Originally posted by nathy_87
.get all the engine colour coded-were would i get parts from etc its a 1.4 16v the local scrapyard will have everything that you need get a haynes manual for removal instructions  and paint the bits yourself
.i want the black plastic bits in flame red either get new ones from the scrappy or take you current ones out and sand them prime them and paint them, i think there are painting tutorials in the tutorials section on here
.ICE in the boot ICE and Electrics forum on here should be of help... what do you want? a bit of bass or a full flowing fibreglass install
.alloys you will need alloys that are PCD 4x100 with an offset as close to ET49 as possible
.white clocks (with 4 clocks) couple of options, buy some dials that have already been converted or buy white dials for about Ł40 and fit them yourself
.spoiler what spoiler are you after? if gsi style you may get it from the scrappy otherwise ebay.. or tuning sites
Can anybody help me please? ANY OTHER BITS I'LL ADD ON AT A LATER DATE..
EDIT: I've only managed to get sporty cover seats and a new head unit and some new speakers for the front!
[Edited on 09-02-2007 by nathy_87]
[Edited on 09-02-2007 by --Rikki--]
[Edited on 09-02-2007 by --Rikki--]
|
mattk
Member
Registered: 27th Feb 06
Location: St. Helens
User status: Offline
|
the bits you want colour coding, take them to a bodyshop??
The spoiler, make sure you get a genuine GM one and not a shitty ebay copy
Lockwood white dials easy to do
alloys find some fit them.
|
nathy_87
Member
Registered: 14th Aug 08
Location: West Mids. Drives: Škoda Fabia VRS 5J
User status: Offline
|
yo rikki just seen that psot thanks and for the install id like a fibre glass one as the only cfustom shops ive seenis motor world and halfords 
|
RKS
Member
Registered: 2nd Mar 04
Location: Gloucestershire UK
User status: Offline
|
you have two options with the fibreglass install, goto a bodyshop and pay them to make and paint an install for you. or make it yourself. allthough dont start with an install as its too big a job for a first job, start small.. maybe with some door pods tutorial here http://corsasport.co.uk/board/viewthread.php?tid=135232
the principal is the same for a big fibreglass install as it is for door pods.. allthough it is a lot of work doing an install...
|
thecorsaal
Member
Registered: 27th May 06
Location: Tyne and Wear
User status: Offline
|
check out my mates car audio stuff
BASSMECHANIX
totally depends what you want, theres HUGE differances between competition installs and street installs etc.
need any help mate u2u me. ive got loads of experience with systems of all types
|
