lee-roy 
Member 
 
Registered: 24th Oct 06
 
User status: Offline 
 
 | 
 
alrite folks., my engine has just gone to pot in my 1.4 SRI corsa, 1994.  
I want to get a bigger engine in there if i can, what engine will slide straight in there with no modifying anything? 
 
1.6 16V astra engine for example? 
 
thanks in advance!
 | 
Robin 
Premium Member
 
Registered: 7th Jan 04
 Location: Northants Drives: Clio 182 Cup 
User status: Offline 
 
 | 
 
1.6 16v, 1.8 16v smallblock (X18XE1), 2 litres aren't hard to get in, V6 will go in with a bit of work, but no cutting as far as I know, and the 2.2 from an astra goes in, apparently. 
 
anything is possible with work  
 | 
lee-roy 
Member 
 
Registered: 24th Oct 06
 
User status: Offline 
 
 | 
 
yeah but the thing is i've never done anything like this before, so i just wanted a straight swop basically, but with a bigger engine. 
 
so do you think the 1.6 16v engine will slide straight back in with no work? 
 
cheers
 | 
Robin 
Premium Member
 
Registered: 7th Jan 04
 Location: Northants Drives: Clio 182 Cup 
User status: Offline 
 
 | 
 
an engine swap is an engine swap, if you're doing one, any engine is going to be the same amount of work really. 
 
is your current engine 8v or 16v?
 | 
lee-roy 
Member 
 
Registered: 24th Oct 06
 
User status: Offline 
 
 | 
 
1.4 8v
 | 
Robin 
Premium Member
 
Registered: 7th Jan 04
 Location: Northants Drives: Clio 182 Cup 
User status: Offline 
 
 | 
 
right, then you'd need to change one of the engine mounts anyway. 
 
the 1.6 16v would probably be just as hard as a 2 litre into an 8v car, as the wiring is completely different, and getting the loom for the standard immobiliser in would be a pain, unless the 8v has a chip in the key. 
 
I've never done a 2 litre conversion though, so I'm just making assumptions on the ease of installation.
 | 
Dave A 
USER UNDER INVESTIGATION - DO NOT TRADE 
 
Registered: 10th Dec 03
 Location: County Durham 
User status: Offline 
 
 | 
 
any engine conversion is easy. 
 
as long as you have the right parts, right tools and the knowledge. A 1.6 16v conversion is about the same as far as difficulty and time as a 2 litre conversion.
 | 
lee-roy 
Member 
 
Registered: 24th Oct 06
 
User status: Offline 
 
 | 
 
the only thing that is worrying me, is the wiring. it will be completly different wont it? 
 
 |