dazbircher
Member
Registered: 6th Dec 05
User status: Offline
|
?...what have you done with the area behind the tv? its just that i was lining it all up today and realised that when ive got the heating on it going to blow straight into the back of my tv install. have you guys just left it as it is/moved it to face downwards or covered it up etc.
|
boyracer2002
Member
Registered: 10th Aug 02
Location: West Yorkshire
User status: Offline
|
i never have my heaters on - mine is just open as normal still.
|
mwg
Member
Registered: 19th Feb 04
Location: South Lakes
User status: Offline
|
There should be a panel there that you can rotate round to control whether you want the central vents on or not so you should just be able to turn it round so they are blocked off and leave it like that?
I wouldn't leave them open cos it'll make your screen really hot.
|
dazbircher
Member
Registered: 6th Dec 05
User status: Offline
|
ye that what i thought and didnt fancy having a red hot screen. i had a look behind it all and there is like a flat panel that when its one way blocks the bottom of it and the other way allows it to be fully open. ive just closed it off so will see how it goes when i get it all back on
|
ed
Member
Registered: 10th Sep 03
User status: Offline
|
You can cut the ducting off and tape over the resulting hole with duck tape
|
a_j_mair
Member
Registered: 23rd Jan 04
Location: Scotland
User status: Offline
|
i used the standard flap that opens and closes them, cut it all right back then siliconed that in, i would not recomend having it open
|
boyracer2002
Member
Registered: 10th Aug 02
Location: West Yorkshire
User status: Offline
|
quote: Originally posted by ed
You can cut the ducting off and tape over the resulting hole with duck tape
i did that to start with but it fell off in the end 
|
jamied
Member
Registered: 27th Oct 03
Location: Marbella,Spain Drives: C63
User status: Offline
|
YEH i duct taped mine up, i removed the original open close part. hopefully be ok.
jamie
|
mobymaster
Member
Registered: 12th Sep 04
Location: Rawtenstall, Lancashire
User status: Offline
|
Ive got a motorised one in my dash, where the middle vents were.
Had to chop a fair bit of the tube/pipe on the elft out, just made a makeshift cover out of duck tape and taped it in.
Its OK, jus takes a little longer for the left side of the windscreen to demist
|