X 60RSA
Member
Registered: 20th Aug 01
Location: Lincoln
User status: Offline
|
Yes i've got the FK ones with the elongated bolt hole! BUT once set up, should reduce my inside tyre wear alot as i;m wasting tyres at the moment!
I dont know if to get these adjustable top mounts, but even then the bolt holes on the front shockers will need to be the same either side so the top mounts do there job else the camber wil still be out........
Are bat motorsport still on the go as i need some softer helper springs or something i think to stop my speedlines catching the spring......
Thanks rimstyle, fast delivery! 
[Edited on 22-06-2006 by X 60RSA]
|
Scotty C
Member
Registered: 6th Nov 05
Location: Kidderminster Drives: 1.6 16v Sport
User status: Offline
|
What u waiting for? go fit them!
|
X 60RSA
Member
Registered: 20th Aug 01
Location: Lincoln
User status: Offline
|
quote:
Originally posted by Monster
What u waiting for? go fit them!
 looks up at the sky..........looks like rain! I need to get these bits sorted out first, plus buy some spacers and work out what goes on the top of the coilvers.......just that top mount plate i suppose!?
|
PaulW
Member
Registered: 26th Jan 03
Location: Atherton, Greater Manchester
User status: Offline
|
BAT are still there, was down there the other week...
|
X 60RSA
Member
Registered: 20th Aug 01
Location: Lincoln
User status: Offline
|
I'll try find there number and ring them tomorrow, website doesnt work i dont think.
Might get away with just 5mm spacers, i've got some v6 calipers abd 288mm discs on the way, i'd say i might need spacers for them anyway.
|
Ian
Site Administrator
Registered: 28th Aug 99
Location: Liverpool
User status: Offline
|
0151 709 8585
|
X 60RSA
Member
Registered: 20th Aug 01
Location: Lincoln
User status: Offline
|
Thanks mate, cheers.
|
bradfincham
Member
Registered: 20th Sep 02
Location: East Of England Drives: Clio 172
User status: Offline
|
Whack them on,
Konis at rear set to 3/4 hard
try get the front wheels parallel with the backs when putting them on
then get 4 wheel laser alignment with a touch of toe out
i had higher poundage front springs for the weight of my 2ltr, was much better
|
X 60RSA
Member
Registered: 20th Aug 01
Location: Lincoln
User status: Offline
|
quote:
Originally posted by bradfincham
Whack them on,
Konis at rear set to 3/4 hard
try get the front wheels parallel with the backs when putting them on
then get 4 wheel laser alignment with a touch of toe out
i had higher poundage front springs for the weight of my 2ltr, was much better
Well the rear shockers have boggled me big time! I've tried priming them but you have to do all these turns and twists and im lost! Must be something to do with the fact they are damper adjustable ones............no wording for instructions just shoot diagrams! 
|
