mtcmedia
Member
Registered: 19th Nov 02
User status: Offline
|
Hey Y'all,
Just about to replace the exhaust on my corsa c. The car has the PSG2 back bumper, and my current exhaust is a 6x4.
Having read the comments on here, I thought Id go for the Sebring 6x4. Turns out that exhaust sits and a slight angle (which I had read) and the garage I just picked the car up from said it cant be fitted because of where the gap is in the bumper.
I thought I read somewhere that the exhaust can be fitted straight??
|
Robin
Premium Member
Registered: 7th Jan 04
Location: Northants Drives: Clio 182 Cup
User status: Offline
|
any pictures?
and what actually is the question you need answering?
|
mtcmedia
Member
Registered: 19th Nov 02
User status: Offline
|
I have PSG2 back bumper which has the space cut out for backbox.
Right now if I go to fit the Sebring 6x4 box it doesnt go into the space its too far over, is there any way to get this lined up? Has anyone done it?
[Edited on 16-06-2006 by mtcmedia]
|
mtcmedia
Member
Registered: 19th Nov 02
User status: Offline
|
Can I get the Sebring 6x4 on my C with the PSG kit?
[Edited on 16-06-2006 by mtcmedia]
|
RichR
Premium Member
Registered: 17th Oct 01
Location: Waterhouses, Staffordshire
User status: Offline
|
on COrsa B
the exhaust is angled to follow the line of the standard bumper - but as the PSG2 doesn't line up it looks wrong
I havnt sorted mine just yet but Stubbsy had his redone - they just cut off the tailpipe section from the back box and reweld it straight
for any half decent exhaust place or bodyshop its a 10 minute job
|
mtcmedia
Member
Registered: 19th Nov 02
User status: Offline
|
ok so should be the same job for a C?
|
RichR
Premium Member
Registered: 17th Oct 01
Location: Waterhouses, Staffordshire
User status: Offline
|
yeah - not a big job to have it straightened - any half decent exhaust place which can weld should do it
|
