c4rsa-sport
Member
Registered: 6th Apr 05
Location: halesowen - birmingham
User status: Offline
|
right i have been fitting the mantzel again today i have a few problems which i am about to post about, sorry pics are of my phone so not that good, here we go...
1.) i have this plug which i cant find anywhere for it to plug in, does anybody know where it should go??
2.) from the mantzel you have the little bit of pipe coming from this where would i conect this to?? (it is the little bit pointing up at the camera)
3.) the pipe on the right i cant seem to remember where the other end of the pipe goes
and does this look like the pipe that came off there?
4.) how are you meant to get the coolant pipes up onto the TB as i have no room whats so ever, any ideas?
any ideas would be gratefull, and if you have any pics that would help even more
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
1, that is the plug that has the wires for the oil pressure light, vehicle speed sender etc... no need to have unplugged that. find the other end and plug it back in
2.that is the vaccum take off. from this you need to re-connect all of the sensors and solenoids that rely on vaccum, i.e map sensor, sai solenoid, fuel tank vent valve....
3. that used to have a pipe that connected to the throttle body tubing. just get a bottle to use as an oil catch tank. (food colouring bottle is ideal size)
4. coolant pipes dont need to go through the throttle body (told you this twice already ) just cut the pipes so they are the right lenghth and join them using a piece of copper piping (radiator piping) if you dont have a proper joint piece. (machine mart sell the real ones)
5. Pics? here you go
if you get stuck, ive u2u'd my mobile number.
|
|
