Rich H
Member
Registered: 26th Oct 05
Location: West Sussex Drives: E46 M3
User status: Offline
|
Well, I had the day off today, so gave the car a bit of a clean off and decided to try and get some proper photos of it now it has been lowered.
Its only lowered -35mm but the looks are improved, and handling is a hell of a lot better imo too!
Recently had MOT and had to have chassis welding though Various plans including backbox, Post 97 bumpers, Respray of dodgy paint areas, Smoked Lights, Debadged Grille and also, later in the year, a new 1.2 engine with 5 speed box (mines on 128,100 atm!) were all planned, but, the money side of things on the MOT made me rethink all this - Im probably gonna shift this soon, and go for a Corsa C 1.2 SXi 
Anyway, on with the Pics! 





|
Rileysport
Member
Registered: 18th Jun 04
Location: West Yorkshire
User status: Offline
|
-35mm get it lower 
looks good though mate
|
Brett
Premium Member
Registered: 16th Dec 02
Location: Manchester
User status: Offline
|
Doesn't look very low TBH, If I was gonna spend money lowering a car I would go for a noticable drop.
|
Rich H
Member
Registered: 26th Oct 05
Location: West Sussex Drives: E46 M3
User status: Offline
|
Its far lower than it was though! Just look im my garage if you dont believe me! I went for -35 as I didnt want to go stupidly low for 2 main reasons - 1) The wank roads around here, and 2) The fact that I quite often have 5 people in my car! Need to get the exhaust rubbers/mounts tightened up aswel, as it knocks really badly on the rear beam atm
|
VegasPhil
Premium Member
Registered: 16th Jan 05
Location: Fareham, Hants Drives: Octavia VRS
User status: Offline
|
Such an improvement on the loweredness 
Don't get a C Rich! Get a late B SXi...
[Edited on 10-03-2006 by VegasPhil]
Corsa 2.0 16v Vegas - Sold
|
Rich H
Member
Registered: 26th Oct 05
Location: West Sussex Drives: E46 M3
User status: Offline
|
Cheers Phil 
Steelies and 4x4 suspension will probably be back on when I sell it 
And I want a C! They don't need a huge amount doing to them, it should last me for a long time, and the spec is good! Plus I cant find a single 1.2 Corsa B SXi around anywhere near me!
|
Dione J
Member
Registered: 22nd Sep 04
Location: West Midlands Drives: Leon Cupra Turbo
User status: Offline
|
It's nice, but should of got it down lower...

[Edited on 10-03-2006 by d_jay50]
|
Rileysport
Member
Registered: 18th Jun 04
Location: West Yorkshire
User status: Offline
|
quote: Originally posted by d_jay50
It's nice, but should of got it down lower...

[Edited on 10-03-2006 by d_jay50]
thats not low either 
i'll get some pics up in a bit
|
Dione J
Member
Registered: 22nd Sep 04
Location: West Midlands Drives: Leon Cupra Turbo
User status: Offline
|
it's low enough for uk roads, just that the wheel is turned 
[Edited on 10-03-2006 by d_jay50]
|
Rileysport
Member
Registered: 18th Jun 04
Location: West Yorkshire
User status: Offline
|
quote: Originally posted by d_jay50
it's low enough for uk roads, just that the wheel is turned 
[Edited on 10-03-2006 by d_jay50]
yeah in all fairness mine's probably too low
|
Rich H
Member
Registered: 26th Oct 05
Location: West Sussex Drives: E46 M3
User status: Offline
|
Well if I was gonna keep the car for longer, I would probably get new wheels and got -40mm, but even atm its only just practical, potholes and speedhumps around here are all over the place - I keep scraping mudflaps etc already! But there you go, I wont have this for a huge amount of time now I'd have thought, so I'll keep it as it is for the moment
|
Dione J
Member
Registered: 22nd Sep 04
Location: West Midlands Drives: Leon Cupra Turbo
User status: Offline
|
Just read your signature..
How comes its £271 to get ya car through the MOT?
|
Rich H
Member
Registered: 26th Oct 05
Location: West Sussex Drives: E46 M3
User status: Offline
|
That would be the welding! Bastard MOT took me by suprise so much - I really didnt think it was that bad - but because of that, all other plans for it have been cancelled, and I also have gone off the car!
|
aovertonwba
Member
Registered: 31st Oct 05
Location: Mere Green, West Midlands
User status: Offline
|
ur car needs alloys
|
Rob B
Member
Registered: 8th Jan 04
Location: Area Motorsport Drives: Race EP3
User status: Offline
|
quote: Originally posted by SRi-Co
quote: Originally posted by d_jay50
It's nice, but should of got it down lower...

[Edited on 10-03-2006 by d_jay50]
thats not low either 
i'll get some pics up in a bit
I agree that looks about 40mm.
|
mav
Member
Registered: 19th Jun 01
Location: Scotland
User status: Offline
|
it's got alloys 
Looks better mate but i think due to the 14" alloys on it makes it look higher..60mm would be good on 14's...
getting there though, don't get disheartened just because mot..
|
Rob B
Member
Registered: 8th Jan 04
Location: Area Motorsport Drives: Race EP3
User status: Offline
|
50 - 60 mm on those alloys, just fitted so not bedded in
|
abdus
Member
Registered: 23rd Feb 06
User status: Offline
|
it's still better...
nice mate...slowly but all will come....
|
mwg
Member
Registered: 19th Feb 04
Location: South Lakes
User status: Offline
|
Mine is lower than most Corsas I've seen with 40mm kit even though its only lowered 30mm
|
Rob B
Member
Registered: 8th Jan 04
Location: Area Motorsport Drives: Race EP3
User status: Offline
|
quote: Originally posted by Matty G
Mine is lower than most Corsas I've seen with 40mm kit even though its only lowered 30mm
Cause you have 17s though mate, with 16's my tyres sat up in the arch, with my 15s arch sits slightly higher.
|
mwg
Member
Registered: 19th Feb 04
Location: South Lakes
User status: Offline
|
theres that but also mates have had/do have Corsas that are lowered 40mm with 17s and mines still lower than theirs
|
Dione J
Member
Registered: 22nd Sep 04
Location: West Midlands Drives: Leon Cupra Turbo
User status: Offline
|
quote: Originally posted by hamman
That would be the welding! Bastard MOT took me by suprise so much - I really didnt think it was that bad - but because of that, all other plans for it have been cancelled, and I also have gone off the car!
sorry to hear about that, im dreading my MOT - infact i dread it every year
|
Dione J
Member
Registered: 22nd Sep 04
Location: West Midlands Drives: Leon Cupra Turbo
User status: Offline
|
quote: Originally posted by Matty G
theres that but also mates have had/do have Corsas that are lowered 40mm with 17s and mines still lower than theirs
Matty,
done anything new to the black beauty?
|
mwg
Member
Registered: 19th Feb 04
Location: South Lakes
User status: Offline
|
Washed it, polished it, waxed it, driven it, got it dirty
|
aovertonwba
Member
Registered: 31st Oct 05
Location: Mere Green, West Midlands
User status: Offline
|
i ment after market alloys it will look so much better
|