Melville
Member
Registered: 4th Jun 03
Location: Newcastle upon Tyne
User status: Offline
|
Ok I had a go at soldering in a blue LED into the passenger window switch, it all worked fine for a few weeks then it stopped working. The drivers side would stil operate it. Shortly after that the whole thing stopped working (drivers side window stil works fine/passenger not at all off any switch) . So I bought a new switch and replaced it and it stil doesnt work. Could I have damaged something else? I have checked all the fuses and non are blown. When I try and press the button I get a little click noise similar to the noise you get when the window is fully shut and you try to push it up further.
Thanks for any help
Mark
|
RKS
Member
Registered: 2nd Mar 04
Location: Gloucestershire UK
User status: Offline
|
sounds like the motor has gone,
|
Richie
Member
Registered: 3rd Dec 02
Location: Newport, Wales
User status: Offline
|
same here, sounds like a siezed motor. have u got someone to listen to the motor when u press the button?
|
CorsaJunkie
Member
Registered: 2nd Feb 03
Location: Athens
User status: Offline
|
1)check the connections of the switch that you replaced, is the polarity etc correct?
2)if the connections are ok and it still doesnt work, try pushing the window down with your hand while pushing the down button- this might help the motor to "unstuck"
|
