colette
Member
Registered: 3rd Jan 04
Location: Great Lumley, County Durham
User status: Offline
|
how so you get a really shiny finish on it? 
|
Rus
Member
Registered: 24th Jan 05
Location: SE London, Kent
User status: Offline
|
p400 and p200 sandpaper, rub it!
and laquar
|
colette
Member
Registered: 3rd Jan 04
Location: Great Lumley, County Durham
User status: Offline
|
rub the paint that just been put on? then laquer???
|
moddedcorsa
Member
Registered: 15th Aug 02
Location: Argyll, West scotland
User status: Offline
|
yes. but id use p1000 wet and dry, use it wet, rub the paint lightly, this removes any imperfections etc. Then 2 coats of laquer, very light rub again, then final coat of lacquer.
Make shure the laquer is warm, keep the can in hot water for few mins prior to painting, this lets the laquer come ouf in a really fine mist, and gives an excellent finnish, Same goes for the paint (warm it first)
|
Richie B
Member
Registered: 18th Apr 04
Location: Newcastle
User status: Offline
|
rub the dash parts to get rid of the texture (make them smooth), then paint, then use laquer
|
Roadrunner
Member
Registered: 7th Apr 05
User status: Offline
|
Its all down to preperation! Get the smoothest finish you can with P1000 the paint and plenty of laquer
|
raptor corsa
Member
Registered: 9th Feb 04
Location: st.albans
User status: Offline
|
or even use a finer grade sand paper, i use 1200 grit then once laquered i use 2400 grit softly then polish to give an even finish
|
