James@CCC
Member
Registered: 10th Nov 03
Location: Eaton Bray, Bedfordshire
User status: Offline
|
What the hell does this mean? I usually can work out wiring diagrams but this is just too random! Appartnely need 3 car relays, one of which 5 pin...
Its for relocating the hazard switch so that you can just have a one off switch rather than the current thing
Thanks!
|
James@CCC
Member
Registered: 10th Nov 03
Location: Eaton Bray, Bedfordshire
User status: Offline
|
o, and is it an MOT thing that the switch must have a red triangle and flash when on?
|
Richie
Member
Registered: 3rd Dec 02
Location: Newport, Wales
User status: Offline
|
gawd they have made that confusing.
At most you would need 2 flasher units (one for each indicator circuit) and thats it, or you could use diodes and one flasher relay, but its easier to use 2.
Just tie your hazard switch up somewhere behind the dash (leave it plugged into the cable tho)
Then get a flasher unit, from a switch take an earth to the trigger on the flasher, then from the flasher to the appropriate indicator wire
|
James@CCC
Member
Registered: 10th Nov 03
Location: Eaton Bray, Bedfordshire
User status: Offline
|
nup, still dont understand that for shit  but i cant leave the hazrad switch like it is!
ill buy a couple 'flasher units' (wot r these and where from?) and then i may have more of a clue..
|
James@CCC
Member
Registered: 10th Nov 03
Location: Eaton Bray, Bedfordshire
User status: Offline
|
bumpy
|
Richie
Member
Registered: 3rd Dec 02
Location: Newport, Wales
User status: Offline
|
http://www.autosparks.co.uk/store/catalogue/list.asp?l=71
|
James@CCC
Member
Registered: 10th Nov 03
Location: Eaton Bray, Bedfordshire
User status: Offline
|
oooh, so i need to buy 2 of these 
and then....??? really no idea. not understanding the wiring diagrams at all. can u draw me one ill love u forever 
|
Richie
Member
Registered: 3rd Dec 02
Location: Newport, Wales
User status: Offline
|
to be honest mate i dont want to draw you a diagram for something that may not work, im gonna go rip out my haynes manual in a minute
|
Ally
Member
Registered: 2nd Jul 03
Location: Pontypool Drives: a Skoda
User status: Offline
|
Richies not Electrical  if he was i would get electrocuted when i touch him
|
James@CCC
Member
Registered: 10th Nov 03
Location: Eaton Bray, Bedfordshire
User status: Offline
|
your saying you dont feel a spark
oooh, and fank u Richard 
[Edited on 01-04-2005 by corser]
|
James@CCC
Member
Registered: 10th Nov 03
Location: Eaton Bray, Bedfordshire
User status: Offline
|
bummmmmmmp, bet u'd forgotten about me
please someone draw me a wiring diagram
|
Richie
Member
Registered: 3rd Dec 02
Location: Newport, Wales
User status: Offline
|
im still trying ive tried a few methods so far but have been unsucessful
|
Richie
Member
Registered: 3rd Dec 02
Location: Newport, Wales
User status: Offline
|
Only one i havent tested yet is:
Split wire from Pin 6 (Black/white) into two wires with p600D diodes on each end, then connect one of the wires to the other black/white wire and the other to the black/green wire.
|
James@CCC
Member
Registered: 10th Nov 03
Location: Eaton Bray, Bedfordshire
User status: Offline
|
ooh, id thought ud forgotten, didnt no u were out trying things!
im still more than a little lost, but do u think that one u just descibred would work?
thanks for any inut mate. it is GREATLY appreciated
|
Richie
Member
Registered: 3rd Dec 02
Location: Newport, Wales
User status: Offline
|
well its gonna be tested sometime tomorrow, just waiting for the p600d diodes to turn up
|
James@CCC
Member
Registered: 10th Nov 03
Location: Eaton Bray, Bedfordshire
User status: Offline
|
wow
cheers buddy
|
Richie
Member
Registered: 3rd Dec 02
Location: Newport, Wales
User status: Offline
|
still working on this mate, i have the diodes just waiting on some solder now 
|
James@CCC
Member
Registered: 10th Nov 03
Location: Eaton Bray, Bedfordshire
User status: Offline
|
thanks mate
|
