Tiger
Member
Registered: 12th Jun 01
Location: Leicestershire Drives:Astra VXR
User status: Offline
|
On my sealed system, boiler packed up, waiting for someone to come and look at it.
Going to use my Immersion for hot water but i think ive found my problem - the pumps red hot - i think it was caused by there being no pressure in the system which ive now topped back up to 1 bar because it was on Zero - would the fact that there was no pressure in the system have caused the pump to run dry and burn out? Theres AC at the pump but theres no way its turning coz theres no noise or even a slight vibration. Boilers on lockout.
Ben.
[Edited on 21-03-2005 by Tiger]
|
Colin
Member
Registered: 4th Apr 02
User status: Offline
|
pumps usually red hot it pumps hot water all day
Could have just been air in it and now its primed again its holding pressure
|
Tiger
Member
Registered: 12th Jun 01
Location: Leicestershire Drives:Astra VXR
User status: Offline
|
Yeah but not this hot surely - cant touch it! The pump isnt running i dont think - can normally hear pumps running and theres no control wire in it so its not waiting to be switched from the boiler...
|
Tiger
Member
Registered: 12th Jun 01
Location: Leicestershire Drives:Astra VXR
User status: Offline
|
As you can see, my concern here is that the pump (that has no local fuse) will slowly get hotter causing it to burn and catch fire.
|
CCA
Member
Registered: 6th Dec 04
Location: Somewhere Drives: Not a bloody Vauxhall!
User status: Offline
|
You cant keep your immersion heater running all day as there constant heat going in but nothing to cool it down
We had this when our boiler was being replaced, plus its damn expensive to keep it running. You need to give it a break an cool down then heat up again
|
TNM
Member
Registered: 5th Apr 04
Location: Nottingham Drives: VW Tiguan
User status: Offline
|
Im a plumer 
Clean any ones pipes out me
|
Tiger
Member
Registered: 12th Jun 01
Location: Leicestershire Drives:Astra VXR
User status: Offline
|
Using the immersion isnt a problem - my house burning down is.
|
CCA
Member
Registered: 6th Dec 04
Location: Somewhere Drives: Not a bloody Vauxhall!
User status: Offline
|
quote: Originally posted by Tiger
Using the immersion isnt a problem - my house burning down is.
So be clever and turn it off to let it cool down then when you need it again turn it back on to heat up
|
Skipz
Member
Registered: 23rd Aug 03
Location: Falkirk: Drives:nothing but gettin another Corsa
User status: Offline
|
quote: Originally posted by TNM
Im a plumer 
Clean any ones pipes out me
   
|
Tiger
Member
Registered: 12th Jun 01
Location: Leicestershire Drives:Astra VXR
User status: Offline
|
quote: Originally posted by CuteCorsaAngel
quote: Originally posted by Tiger
Using the immersion isnt a problem - my house burning down is.
So be clever and turn it off to let it cool down then when you need it again turn it back on to heat up
I know your trying but you dont seem to understand - i think its burnt out - i.e. jammed, stalled whatever you want to call it. They dont give you switches to turn these things off.
Fuck it - ill leave it on - if it burns it burns.....
|
greengoddess
Member
Registered: 17th Jun 03
Location: Northern Ireland, formerly Enfield North London
User status: Offline
|
If it is jammed, usually there is a bleed screw on top try turning that with a screwdriver u will know if it is jammed as you wont be able to move it. My pump has a separate switch with fuse to turn it on/off.
|
adelcorsa
Member
Registered: 21st Apr 03
Location: ipswich
User status: Offline
|
my bf is a plumber want me to ask him
|
Tiger
Member
Registered: 12th Jun 01
Location: Leicestershire Drives:Astra VXR
User status: Offline
|
Cheers - the pump needs replacing. Ill sort it tomorrow.
Thanks.
|
greengoddess
Member
Registered: 17th Jun 03
Location: Northern Ireland, formerly Enfield North London
User status: Offline
|
If it is jammed (mine was) you can sometimes free them by unscrewing bleed screw and turning the spindle thing inside with pliers/pump grips.I freed mine this way, but watch out if it does free as water will start coming out so put the screw back on tight.
[Edited on 21-03-2005 by greengoddess]
|
adelcorsa
Member
Registered: 21st Apr 03
Location: ipswich
User status: Offline
|
y are u replacing it
|
adelcorsa
Member
Registered: 21st Apr 03
Location: ipswich
User status: Offline
|
if it seased up it should be ok for a bit as long as u get the water back into the system
did u know that u have to have a qualification to work on the sealed system as if any thing went wrong u would have no come backs thought id warn you
|
LukeGSi
Member
Registered: 9th Dec 03
User status: Offline
|
|
Welsh-Cruiser
Member
Registered: 6th Mar 05
Location: South Wales
User status: Offline
|
quote: Originally posted by adelcorsa
if it seased up it should be ok for a bit as long as u get the water back into the system
did u know that u have to have a qualification to work on the sealed system as if any thing went wrong u would have no come backs thought id warn you
Ur Talkin Bout An Unvented System
U Have To Have Qualifications To Work On A Boiler That Delivers Over 15 Litres Of Water A Minute
The Reason Y Ur Pump Is Red Hot Is Cause Ur Runnin It Dry An Will Eventually Burn Out
U Need To Top The Pressure Up As U Have Done 
[Edited on 21-03-2005 by Welsh-Cruiser]
|
Welsh-Cruiser
Member
Registered: 6th Mar 05
Location: South Wales
User status: Offline
|
quote: Originally posted by Tiger
On my sealed system, boiler packed up, waiting for someone to come and look at it.
Going to use my Immersion for hot water but i think ive found my problem - the pumps red hot - i think it was caused by there being no pressure in the system which ive now topped back up to 1 bar because it was on Zero - would the fact that there was no pressure in the system have caused the pump to run dry and burn out? Theres AC at the pump but theres no way its turning coz theres no noise or even a slight vibration. Boilers on lockout.
Ben.
[Edited on 21-03-2005 by Tiger]
Have U Got An Unvented Hot Water Cylinder?
|
adelcorsa
Member
Registered: 21st Apr 03
Location: ipswich
User status: Offline
|
not a boiler but any instantanious hot water device so in u have to have it to work on a unvented system
remember if u r going to replace the pump replace the two rubber washers to they should come with the pump
but it will be ok as long as u top it up
|
Welsh-Cruiser
Member
Registered: 6th Mar 05
Location: South Wales
User status: Offline
|
Make Sure U Bleed The Pump Afterward's Throught The Screw On The Front.
An Fit A Grunfos Pump 15-60 Or An Alpha 
[Edited on 21-03-2005 by Welsh-Cruiser]
|
Ben
Banned
Registered: 12th Jan 03
Location: West Yorkshire
User status: Offline
|
Burn baby burn.. disco inferno .
sleep with one nostril open tonight matey , otherwise you might wake up a sinder
|
Tiger
Member
Registered: 12th Jun 01
Location: Leicestershire Drives:Astra VXR
User status: Offline
|
I woke up with Cindy instead.
|
Tiger
Member
Registered: 12th Jun 01
Location: Leicestershire Drives:Astra VXR
User status: Offline
|
The house is under a year old - the heating system is gauranteed for 5 years P&L so they are coming to fit a new pump on thursday.
Pumps still too hot to touch, bleed screw will undo so far then its like a spring, you can pull it out and it springs back in.
|