16V_1600
Member
Registered: 7th Oct 07
User status: Offline
|
I have had a scan in the how to. but I still can't seem to get the friggin things off!
Any tricks of the trade to removal? Cheers 
|
Limecat
Banned
Registered: 25th Jun 05
Location: The Internet
User status: Offline
|
There is a circlip to the rear of the spindle, pop it off with 2 flat head screwdrivers as an internal circlip tool doesn't fit down the back, or at least mine didn't!
|
corsa_beany
Member
Registered: 23rd Oct 07
Location: Stroud, Gloucs.
User status: Offline
|
or get a bit of rag under the handle, to the spindle and move it back and forth while trying to pull backwards...the rag will catch the edges of the clip, and will pop it out enough to grab hold of it!! (does this make any sense?!)
|
Deadude
Member
Registered: 30th Jun 07
Location: Spondon, Derby
User status: Offline
|
hehe i tryed to get mine off for like over an hour last time i tried after a while i figured theyd been glued on 
|
16V_1600
Member
Registered: 7th Oct 07
User status: Offline
|
cheers guys. Will try again
|
Haimsey
Premium Member
Registered: 8th May 05
Location: Nottingham Drives: Corsa B
User status: Offline
|
As said above really, get a bit of rag (something like cleaning cloth or something) and slide it behind the winder, then move back and forth. - the aim of this is to try and snag the retaining clip so it pings off out of place 
BE WARNED :- try to watch where it goes so you dont lose it 
Then just slide the winder off when putting the clip back, use something like a flat bladed screwdriver and gently push the clip till you feel/hear it click back into place 
[Edited on 21-11-2007 by Haimsey]
Marcy Marc 
White Sport Progress Thread
|
paul.mitchell1984
Member
Registered: 31st Aug 06
Location: Wakefield
User status: Offline
|
i found bit of wire bent at the end easiest, ease handle out asd far as poss with screw driver look behind it and loop wire under clip,when they release they fire off
|
