BigMac
Member
Registered: 2nd Jun 05
Location: Wigan lancs Drives: Mercedes-Benz W202T 25TDi
User status: Offline
|
I need to sniff in the front edge of a roof and fade it in down the sides of the sunroof, what’s the crack with fade in thinners, how is it used ???
Never done any fading in before, I’ve only done full sides or panels – so any help appreciated
|
ShEp
Member
Registered: 9th Aug 05
Location: Dingwall, Highland
User status: Offline
|
sniff it?
i'd be about as much use as a pogo stick in a paddling pool,
thought i'd write in your thread tho b4 it crashed and burned
|
corsa sam
Member
Registered: 14th Jul 06
User status: Offline
|
quote:
Originally posted by BigMac
I need to sniff in the front edge of a roof and fade it in down the sides of the sunroof, what’s the crack with fade in thinners, how is it used ???
Never done any fading in before, I’ve only done full sides or panels – so any help appreciated
Once you have feathered the laquer out down the side of the sun roof , clean the gun out with normal thinners . Then put the fade in thinners in the gun and put a light coat over where you have feathered the laquer out and thats it job done.
|
BigMac
Member
Registered: 2nd Jun 05
Location: Wigan lancs Drives: Mercedes-Benz W202T 25TDi
User status: Offline
|
That’s easy enough, I take it, it’s when the lacquer is wet then 2000s when dry and G3 the whole roof after.
|
corsa sam
Member
Registered: 14th Jul 06
User status: Offline
|
quote:
Originally posted by BigMac
That’s easy enough, I take it, it’s when the lacquer is wet then 2000s when dry and G3 the whole roof after.
Yes mate when the lacquer is tacky mate dont 2000s over the bit where you have faded it out
|
BigMac
Member
Registered: 2nd Jun 05
Location: Wigan lancs Drives: Mercedes-Benz W202T 25TDi
User status: Offline
|
Thanks for the info fella
|
