WMCMoo
Member
Registered: 22nd Sep 06
Location: Rushall, West Midlands
User status: Offline
|
Ok People i need all your help here !
Basically heres the story,
i had a MOT and failed lol , it failed on ball joints hand brake cable, so what i did was go and buy a handbrake cable (both side) and 2x ball joints
So i arranged a date with my mate mike we started to tackle the ball joints and did them a piece of piss NO PROBLEM ,
Then ws the hard part ! the handbrake cable we started to tackle the driver side, and the drums was literally welded onto the base and pads ! we finally got them of after half hour of whacking and banging ! lol ... we got the handbrake done and tightened it up ... we ut the wheels on and started up the motor now i got no brakes ? but my handbrak works :S ????
any ideas please
|
Simon_16v
Member
Registered: 14th Aug 06
Location: Yorkshire
User status: Offline
|
Could be fucked master cylinders, take wheel and drum cover off and investigate
|
WMCMoo
Member
Registered: 22nd Sep 06
Location: Rushall, West Midlands
User status: Offline
|
what do i look for tho ?
|
WMCMoo
Member
Registered: 22nd Sep 06
Location: Rushall, West Midlands
User status: Offline
|
see if everything is bolted in the right place etc ?
|
Simon_16v
Member
Registered: 14th Aug 06
Location: Yorkshire
User status: Offline
|
Well any leaking and just see if they move freely
|