aiky007
Member
Registered: 15th Jul 06
Location: central scotland
User status: Offline
|
Just bought some 7"x17" alloys with et45 offset for my corsa b sport any info on what body mods i will need to do so they don't rub on the rear if any.
Also any info on what would be the best springs to use i.e. -30 -40 -60
any help would be welcome
Cheers B 
|
Fro
Member
Registered: 20th Jun 06
Location: Rainham, Essex Drives: A3 2.0TDi Sport
User status: Offline
|
the work you would have to have done depends on how low you go, i was down 60 on 17;s with et42 and i had the rear meatal of the arches cut back and debolted and the plastic arch bonded back on, i also had them flared and rolled out so they were wider, Only rubbed on the back with a full car. Theres pics in my garage 
|
RKS
Member
Registered: 2nd Mar 04
Location: Gloucestershire UK
User status: Offline
|
with et45 alloys you will probably get away with de-bolting the arches, and maybe as frodizzle says cut back the metal slightly,
|
RKS
Member
Registered: 2nd Mar 04
Location: Gloucestershire UK
User status: Offline
|
http://corsasport.co.uk/board/viewthread.php?tid=240626 bit more info there
|
