sam-smith
Member
Registered: 8th Jan 07
Location: plymouth, UK
User status: Offline
|
is it different? i.e. the same as GSI?
or can i just get a 60mm lowering kit for corsa b and it will fit?
was told by the local carnouiseur cretin that i needed different suspension.
but he reckons that the gsi and sport is 20mm lower as standadrd so a 40mm kit will lower it 60mm. now is he just an idiot. cus if you take 20mm shocks out and put 40mm one in it will still be 40mm. not 20mm right?
like i said the blokes a cretin so i wanted to check before buyign the wrong thing (not from carnoiuseur)
|
Ian
Site Administrator
Registered: 28th Aug 99
Location: Liverpool
User status: Online
|
If you fit 40mm springs to a car which is already 20mm lower than standard, it will lower your car only the remaining 20mm.
Its 40mm from standard merit spec.
Sport is half way there.
[Edited on 25-03-2007 by Ian]
|
sam-smith
Member
Registered: 8th Jan 07
Location: plymouth, UK
User status: Offline
|
so did i need the GSI suspension or just normal corsa b sus?
|
Marc
Member
Registered: 11th Aug 02
Location: York
User status: Offline
|
If you remove the shocks and start again you will lower by the new kit.
|
Ian
Site Administrator
Registered: 28th Aug 99
Location: Liverpool
User status: Online
|
Either will do the job but be aware that if the quoted figure is for normal spec then it needs 20mm taking off it.
If the drop is for Sport then it will drop it that far.
Also, don't take it as gospel. Condition of dampers and other suspension components can also have an effect on how it sits.
This all assumes of course that the information you are getting is correct which even in a brochure might be wrong if the manufacturer spec isn't taking in to account.
How low do you want it?
[Edited on 25-03-2007 by Ian]
|
sam-smith
Member
Registered: 8th Jan 07
Location: plymouth, UK
User status: Offline
|
i am getting a 60mm Gmax lowering kit in two weeks.
|
sam-smith
Member
Registered: 8th Jan 07
Location: plymouth, UK
User status: Offline
|
cheers btw
|
Ian
Site Administrator
Registered: 28th Aug 99
Location: Liverpool
User status: Online
|
Look at this example
http://cgi.ebay.co.uk/LOWERING-SPRINGS-VAUXHALL-CORSA-1-6-GSI-20MM_W0QQitemZ170074131212QQcategoryZ40192QQcmdZViewItem
AB60-155 CORSA 1.0,1.2i,1.4i 3/93>00 40 mm drop
AB60-155 CORSA 1.4 Si,Sri,Sport 3/93>00 35 mm drop
AB60-155 CORSA 1.6 Gsi 3/93>00 20 mm drop
Same model number for all kit but it lowers different models different distances.
I would put the SRi/Sport being 35mm down to then assuming the engine is heavier, which there is probably some truth in.
|
sam-smith
Member
Registered: 8th Jan 07
Location: plymouth, UK
User status: Offline
|
yeah. i get ya.
so i will be fine with either kit really?
|
Ian
Site Administrator
Registered: 28th Aug 99
Location: Liverpool
User status: Online
|
Check the model numbers - its probably the same kit anyway.
|
sam-smith
Member
Registered: 8th Jan 07
Location: plymouth, UK
User status: Offline
|
where can i find that?
|
Ian
Site Administrator
Registered: 28th Aug 99
Location: Liverpool
User status: Online
|
Actually its not.
http://www.dcp-shop.co.uk/buy-car-accessories/default.php?cPath=1322
Same price though, and on the different applications the only difference is drop.
|