Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
is it possible to put electrical driven dials, into a mechanical driven car??
|
csweatherston
Member
Registered: 16th Jan 06
Location: Devon
User status: Offline
|
yes
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
would you use the dials, "obviosly" and a electrical sender and some wiring??
what is involved
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
yes, you kust need to replace the speed sender in the gearbox with a worm drive electronic type one and connect up the 3 wires.
black = ign live
brown = earth
blue/red = speeed signal to clocks.
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
does the ecu read the speed signal from that wire??
and where do i connect it on the clocks?
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
you will need to make up a loom with the 3 wires. the signal one just links into the blue/red at the back of the clocks.
Adam, I have a plug and the loom spare in the old shell. all you would need is the sender for the gearbox. want it?
|
csweatherston
Member
Registered: 16th Jan 06
Location: Devon
User status: Offline
|
ive got a 3wire gearbox sender....and a set of electric clocks
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
how much?? for loom
and dials??
|
