L30 SCT
Member
Registered: 27th Nov 05
Location: aberdeen
User status: Offline
|
hi i bought one of the inlet manifolds of vxpaul. mantzel replica
can you use the c16xe throttle bodie or do you have to buy a x16xe one.
i have a c16xe engine thats why i am asking
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
you will need the lower part of the manifold from an x16xe ( i have a few spare) and a c16xe trrottle body should be fine.
|
L30 SCT
Member
Registered: 27th Nov 05
Location: aberdeen
User status: Offline
|
no its ok rob_lee sent me that yesterday. is that all i need?
do i need anything else or does everything else come with the kit?
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
you will need a pipe to connect your afm to the throttle body, a pipe to connect the air filter to the afm, lots of vaccum pipes and a suitable pipe to extend the brake servo hose, new inlet manifold gasket,
the cheap e-bay copies arent as good as they seem, last one i fitted had air leaks around the bolts due to them being a poor design. had to fit nylon washers to cure the problem. the bulkhead will also need modifying (hitting with a big hammer)
|
