m1ke 
Member 
 
Registered: 9th Sep 05
 Location: Tewkesbury 
User status: Offline 
 
 | 
 
ho do i remove the hazard light switch and the 2 air vents etc as i want the space to put my screen but can not get hazard ligth and vents out etc (corsa b by the way) 
please reply with pictures (if you can) 
many thanks  
Mike
 | 
cougaruk 
Member 
 
Registered: 6th Sep 05
 Location: Wickford Essex 
User status: Offline 
 
 | 
 
Mike 
 
Just did mine this weekend, screen fitted working ok    remove the slider knob, then remove the slider trim, you will find 2 screws there, the other 2 are hidden behind the air vents, pull down on one of the air vents, put a screw driver on the top of the vent and apply a small amount of force it will drop down a couple of inches...using a longish screw driver remove the screw, do the same with the other vent, i then glassed up the hole left at the back of the vents, or you will heat up the screen.... hazard light switch has a tab on the top just press it down and remove. sorry aint got pics to remove items
 | 
m1ke 
Member 
 
Registered: 9th Sep 05
 Location: Tewkesbury 
User status: Offline 
 
 | 
 
thanks alot wil try it soon  see if i can do it, any else got any pics ?
 | 
MarkW 
Member 
 
Registered: 19th Mar 04
 Location: Orpington, Kent 
User status: Offline 
 
 | 
 
best off getting a haynes manual as its a tricky job
 | 
cougaruk 
Member 
 
Registered: 6th Sep 05
 Location: Wickford Essex 
User status: Offline 
 
 | 
 
Yeah Mark a haynes manual will tell him how to do it....i didnt know those screws were behind the vents trim i got a manual   
 
Here's how its turning out Mike 
 
  
 
  
 
  
 
 
 
[Edited on 09-11-2005 by cougaruk]
 |