Edd
Member
Registered: 8th Nov 04
Location: Glasgow
User status: Offline
|
last week was told this was the reason for my engine management light coming on.vauxhall wanted £130 for the part and wanted 2 hours labour to fix it,obviously i declined.so i bought the part from autovaux(£100) and fitted it myself last night and it took me all of 15 minutes.moral of the story vauxhall are rip off bastards
|
Mo
Member
Registered: 29th Jan 03
Location: Bolton, Drives Q3 S-line +
User status: Offline
|
was it hard to fit? i heard that u can just blank them and trick the car into thinking it still works properly?
|
Edd
Member
Registered: 8th Nov 04
Location: Glasgow
User status: Offline
|
really easy to fit.i've heard people say you can blank it off but my corsa is a 1l 12v and you cant do it on these as coolant actually passes through it.
|
Mo
Member
Registered: 29th Jan 03
Location: Bolton, Drives Q3 S-line +
User status: Offline
|
i think my erg's on it's way out. i got some blanking plates for it but havn't got a clue where to start 
got a feeling it's gonna be harder than 1.0 12v cause i've got a 1.6 16v with air con so very little room to work in 
|
a_j_mair
Member
Registered: 23rd Jan 04
Location: Scotland
User status: Offline
|
where did u get your blanking plates and how much were they?
|
Mo
Member
Registered: 29th Jan 03
Location: Bolton, Drives Q3 S-line +
User status: Offline
|
got blanking plates off Stu_22 off here. can't remember how much they were, weren't much tho
|
Edd
Member
Registered: 8th Nov 04
Location: Glasgow
User status: Offline
|
the position on the 12v is really good its on the right hand side just behind the oil filter so its a wee bit cramped but not to bad not got a clue where it is on the 1.6 though
|
Mo
Member
Registered: 29th Jan 03
Location: Bolton, Drives Q3 S-line +
User status: Offline
|
cheers will have a look on a good day and see if i can get the mission over and done with 
|
