3CorsaMeal
Member
Registered: 11th Apr 02
User status: Offline
|
corb?
|
Siberia
Member
Registered: 9th Oct 03
Location: Leprechaun Land Drives : Zafira GSI
User status: Offline
|
flammingcorsa has one...
|
3CorsaMeal
Member
Registered: 11th Apr 02
User status: Offline
|
Let corsa tho
|
Siberia
Member
Registered: 9th Oct 03
Location: Leprechaun Land Drives : Zafira GSI
User status: Offline
|
oh.. yea.. doh.... should have read properly
|
Balling
Premium Member
Registered: 7th Apr 04
Location: Denmark
User status: Offline
|
quote:
Originally posted by jr
the mental 400bhp european one, balling ???
Nope, not me...! 
|
3CorsaMeal
Member
Registered: 11th Apr 02
User status: Offline
|
quote:
Originally posted by Siberia
oh.. yea.. doh.... should have read properly
ummmm, i'm telling
|
bradfincham
Member
Registered: 20th Sep 02
Location: East Of England Drives: Clio 172
User status: Offline
|
Dont think daimo has one on the way, hes going travelling as far as im aware!
Just in a corsa i think you have the whole list there, teddy will soon have one so will i after show season
|
Tom
Member
Registered: 3rd Apr 02
Location: Wirral, Merseyside
User status: Offline
|
VT, I thought you could only bore the 20let/xe block out to 2.1?
|
Teddy
Member
Registered: 19th Jul 04
Location: Northampton Drives: VW Bora 1.9TDi pd130
User status: Offline
|
quote:
Originally posted by bradfincham
Dont think daimo has one on the way, hes going travelling as far as im aware!
Just in a corsa i think you have the whole list there, teddy will soon have one so will i after show season
ssssssssssshhhhhhhhhhh!!!!!!!!!!!!! 
|
BeArDy
Member
Registered: 7th Aug 00
Location: Manchester
User status: Offline
|
quote:
Originally posted by Tom
VT, I thought you could only bore the 20let/xe block out to 2.1?
You can not, well never heard of it......
BUT
you can use a 2.2 Bottom end of a Frontera BUT Venoms Sig say its been rebored and if he was using 2.2 bottom end it wouldent need reboring....
86mm Standard Bore
88mm 2.1
90mm 2.2 (IF your could)
using a standard bloke and i am sure you can not get 90mm Pistions
so eather......
- using a 2.2 block
- Thinks he can uses a 2.0 block and rebored it out and hasent looked into it
Jimmy answer.............
[Edited on 06-04-2005 by BeArDy]
|
J da Silva
Member
Registered: 10th Apr 03
Location: The FACTory
User status: Offline
|
quote:
Originally posted by Tom
VT, I thought you could only bore the 20let/xe block out to 2.1?
Only on the block yes, my next post will explain why, I checked with a specialised re-boration place before I undertook all the work. Then took it to be measured by them to be safe, saved £350 by DIY 
[Edited on 06-04-2005 by VenomTurbo]
|
J da Silva
Member
Registered: 10th Apr 03
Location: The FACTory
User status: Offline
|
quote:
Originally posted by BeArDy
quote:
Originally posted by Tom
VT, I thought you could only bore the 20let/xe block out to 2.1?
You can not, well never heard of it......
BUT
you can use a 2.2 Bottom end of a Frontera BUT Venoms Sig say its been rebored and if he was using 2.2 bottom end it wouldent need reboring....
86mm Standard Bore
88mm 2.1
90mm 2.2 (IF your could)
using a standard bloke and i am sure you can not get 90mm Pistions
so eather......
- using a 2.2 block
- Thinks he can uses a 2.0 block and rebored it out and hasent looked into it
Jimmy answer.............
[Edited on 06-04-2005 by BeArDy]
I have dished H-Section Low compression pistons, with a recess, extra 25cc per pot, if I was to fit flat bedded pistons lets say for example Mahle products then the capacity is 2137cc as the 25 per pot are taken away and the recess is filled in by the mass of the piston tops.
|
SteveW
Member
Registered: 15th Jul 02
Location: Up in the clouds
User status: Offline
|
wow i have just realised i have no idea about engines 
glad mattb is my magical monkey 
|
Jambo
Member
Registered: 8th Sep 01
Location: Maidenhead, Drives: VXR Arctic
User status: Offline
|
exactly what i thought when i read that steve
|
SteveW
Member
Registered: 15th Jul 02
Location: Up in the clouds
User status: Offline
|
go team Thunder eh Jambo
|
Siberia
Member
Registered: 9th Oct 03
Location: Leprechaun Land Drives : Zafira GSI
User status: Offline
|
quote:
Originally posted by VenomTurbo
quote:
Originally posted by BeArDy
quote:
Originally posted by Tom
VT, I thought you could only bore the 20let/xe block out to 2.1?
You can not, well never heard of it......
BUT
you can use a 2.2 Bottom end of a Frontera BUT Venoms Sig say its been rebored and if he was using 2.2 bottom end it wouldent need reboring....
86mm Standard Bore
88mm 2.1
90mm 2.2 (IF your could)
using a standard bloke and i am sure you can not get 90mm Pistions
so eather......
- using a 2.2 block
- Thinks he can uses a 2.0 block and rebored it out and hasent looked into it
Jimmy answer.............
[Edited on 06-04-2005 by BeArDy]
I have dished H-Section Low compression pistons, with a recess, extra 25cc per pot, if I was to fit flat bedded pistons lets say for example Mahle products then the capacity is 2137cc as the 25 per pot are taken away and the recess is filled in by the mass of the piston tops.
interesting..... will it all work though?.... just looking on mig and there so may horror LET storys when the envelope is pushed to much.......
will be brilliant if it all sings in harmony though
|
J da Silva
Member
Registered: 10th Apr 03
Location: The FACTory
User status: Offline
|
The thing with MigWeb is, there is some informational people on there, I didn't want to post about my engine yesterday and I don't really like peole knowing what I plan to or am doing, but I've recently found out a few miggers don't know basic engine science, they've just listened to Johnny Ramble too much, done a few mods themselves and WOW! they automatically seem to have aquired 25years experience at some rally engine building school, yesterday I told mr Beard a wee bit about my car, as I know he was genuinely interested and I'll leave it at that I think, but what you lot don't realise over an internet screen is that this engine has been inspected and tested by a firm who builds caterhams with these engines and have done for over 14years since they became popular in the Cally T's.
I've also told Timrud_ as he's a local lad, seems to have his head screwed on and if he ever wanted to have a nosey he'd be welcome to, and I'd let him have a snoop at Rotherham, where we both go sometimes. That's as far as it goes until everything is sorted, and I have my stats all in a folder ready to show people(block figures,engine power,gearbox stats etc....)
|
dirtydan
Member
Registered: 3rd Sep 03
Location: Canvey, Essex Drives : Corsa Sport
User status: Offline
|
I know Bugger all with cars, and ill leave it as that. :/
|
Robin
Premium Member
Registered: 7th Jan 04
Location: Northants Drives: Clio 182 Cup
User status: Offline
|
i will have one soon, when i get hold of a fitting kit.... and clear my garage
|
Siberia
Member
Registered: 9th Oct 03
Location: Leprechaun Land Drives : Zafira GSI
User status: Offline
|
i do be looking on your fotki site to try and get a glimsp of what this evo 2 will have under the hood... hasent been updated in a while though...
unfortunatly i'm in a situation that i cant have one so i just have to content myself looking at other peoples
|
timrud_
Member
Registered: 3rd Jul 04
Location: Sheffield
User status: Offline
|
VT, can't wait for a good looky when its all done!
Any idea how long?
|
